Haier XQG60-HA800TX(M), XQG60-HA1000TX(M) manual

Page 19

Warning:

1.If the supply cord is damaged, it must be replaced, these are available from an authorised service agent.

2.The appliance must be placed so that the plug is accessible.

3.The appliance is to be connected to the water mains using new hose-sets, old hose-sets should not be reused.

4.The appliance is not intended for use by yong children or infirm persons without supervision. Yong children should be supervised to ensure that they do not play with the appliance

5.if the appliance is supplied from a cord extension set or electrical portable outlet device the cord extension set or electrical portable outlet device should be positioned so it is not subject to splashing Or ingress of moisture.

6.Use the new hose and the old hose should not be reused

7.Ensure carpet does not obstruct the opening in the bases.

18

Image 19
Contents XQG60-HA800TXM XQG60-HA1000TXM Automatic Drum Washing Machine17-18 11-15Function Introduction Unpacking levelling and positioning InstallationConnection of tap and Loading Hose Electric connectionConnecting WaterSupply F1 H Close upMAX Door Lock Button 500Correctly Weight is rightLaundry has Been loadedProgramme has CorrectBeen chosen Detergent has been put in properly Never place bleach in the other compartments Wash is finished Cycle is startedMaintenance five simple precautions for this machine Washing machine wont start Solution to ProblemsThere is too much foam in the tub Machine Check that Machine vibrates too much when spinningGuide for selecting programme Page Wiring Circiut XQG60-HA1000TXM Wiring CIRCIUTXQG60-HA800TXM