Haier 650 user manual Disposal after washing Using process, Cleaning the lint filter

Disposal after washing Using process

After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine.

Please first pull off the power plug from the receptacle before cleaning.

Cleaning the lint filter

The lint filter must be used during washing.

It must be cleaned in time after each using.

1. Take off the lint filter
Put hand at the indicated position.
Push down to take it off. ( See to
Figure 1)	Figure 1

2. Clean the lint

Put it in water and clean while it is still wet.(See to Figure 2)

Figure 2

3. Install the lint filter

After cleaning, insert the bottom

of the lint filter	( marked with
"down side") into the overflow filter ,
then push the upper part of the
filter in ( marked	with " up side ").
(See to Figure 3)	Figure 3

Cleaning the overflow filter

Too much lint on the overflow filter will influence the normal usage of the machine. Please clean it every two months.

1 Take off the overflow filter.

As indicated in the figure, nip the elastic fixing claw and pull it to the direction of the arrow to take it off.

Elastic fixing claw