Haier HWM60-113S user manual Washing sequence

Washing sequence

Wash selector

(standard current, strong current)

Wash timer			Spin timer
		Spin water-filling entrance	(to set to below 1 minute,
(To set to below 2 minute,
first set to 5 minute then			first set to 2 minute then
turn it back. it can increase			turn it back. it can increase
the service life of the timer).			the service life of the timer).
15	3
12	6

9	WASH SELECTOR
WASH TIMER
	SPIN TIMER

Wash

Midway spinning

1.Put the laundries into the spin tub evenly and smoothly.

2.Spin

(1) Put the gland in properly.

Please put in the gland properly even if the laundries quantity is small.

Push Gland

Push

1.Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 1)

Run washing program for some time to stir and dissolve the powder completely.

2.Put in the laundries. If the water quantity is insufficient, please add water.

3.Select the current.

Select the strength of the current according to the laundries. (Figure 2

Figure 1

WASH SELECTOR

Figure 2

15

3

Proper	The laundries	Proper No gland
	are slanting

(2) Close the inner and outer cover of the spin tub.

	Outer cover of
	the spin tub
(3) Spin for 1-2 minutes.	Inner cover of
	the spin tub

3.Run the foam-removing spinning.

4.Select the washing time

Select the washing time according to the laundries. (Figure 3)

126

9

WASH TIMER

(1)	Open the outer cover of the spin tub.
(2)	Insert the water inlet hose into the spin

Water inlet hose

Figure 3

5.After washing, the buzzer will ring. Set the "WASH SELECTOR" at "DRAIN". (Figure4).

WASH SELECTOR

Figure 4

water-filling entrance on the control panel.

Fill water for about 1 minute.

(3) Close the outer cover of the spin tub.

Spin for 1-2 minutes.

Spin water-filling entrance

8 9