Haier HWM60-113S Safety precautions Trouble-shooting Answer to question, Phenomena Reason

Safety precautions

Trouble-shooting Answer to question

Please insert the power cord into special receptacle with rated vol- tage.Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector.

When the machine is normally using, please put the power plug at the location easily to be insert- ed and extracted by hand. Be sure to pull the plug off when there's power failure, or the machine is being moved, cleaned or when it is idle.

(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself.

Phenomena The reason

Earth

If the power cord is bad, to avoid risk it is required to replace it by the technicians ofour special shop or the after-sale service department. Keep the pin of the power plug clean.

Do not put the machine at damp		Do not use water hotter than 50 C .
place like	the bathroom . Never
wash it	with water. Do not place
wet laundries on the control panel.

In case the washing			machine is installed	Do not wash water-proof laundries like
on ground	with	carpet , do not block the		the raincoat, bike covers etc. to avoid
ventilation	hole	with	carpet.	abnormal vibrations in spinning.

Ventilation hole at the bottom of the washing machine

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more.

	Is there power failure?
The machine does	Is the power plug loose?
	Is the pulsator twisted by foreign materials?
not act.
The draining does not work	Is the drain hose put down?
	Is the drain hose frozen?
	Is the drain hose blocked by foreign material?
	Are there laundries falling to the outer side of
	the spin tub?
There's abnormal	Are there hair pin, coins or metal items brought
soundduring washing
	inside the tub?
There's abnormal	Is the machine slanting?
sound and violent	Is the gland pressed evenly?
vibration during	Are there laundries falling to the outer side of
spinning	the spin tub?

Are the laundries in spin tub too much?

There may be some
waterflowing out	of	It is the water remained in the factory inspection
the drain hose in	the	of performance.
first use of the
machine.

2 15