Haier XPB135-LA user manual Safety precautions

Page 4

Safety precautions

Please insert the power cord into special receptacle with rated vol- tage.Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector.

When the machine is normally using, please put the power plug at the location easily to be insert- ed and extracted by hand. Be sure to pull the plug off when there's power failure, or the machine is being moved, cleaned or when it is idle.

Earth

If the power cord is bad, to avoid risk it is required to replace it by the technicians of our special shop or the customer care department. Keep the pin of the power plug clean.

Do not put the machine at damp

Do not use water hotter than 50 C .

place like

the bathroom . Never

 

wash it

with water. Do not place

 

wet laundries on the control panel.

 

In case the washing

machine is installed

Do not wash water-proof laundries like

on ground

with

carpet , do not block the

the raincoat, bike covers etc. to avoid

ventilation

hole

with

carpet.

abnormal vibrations in spinning.

Ventilation hole at the bottom of the washing machine

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more.

2

Image 4
Contents Twin-tub Washing Machine Contents Names of the parts Water-filling translationSafety precautions Petrol Installation and adjustment Install the lint filterHow to change the direction of the drain hoses Preparation before washing Pay attention to followings before washing the laundriesMusts in washing Usage of the detergentWash timer Intensity selection Washing sequenceMidway spinning Rinsing Rinse with water-filingSpinning Cleaning the lint filter Disposal after washingCleaning the overflow filter Trouble-shooting Answers to question Trouble-shooting Answer to question Phenomena ReasonSpecification Packing list