Haier XPB135-LA user manual How to change the direction of the drain hoses

How to change the direction of the drain hoses

Figure 1 indicates the ex factory installation position of the drain hose.

Extend the drain hose from the side of spin tub

Back

Figure 1

Front

Put soft items on the ground. Lean the machine

down gently with the front surface facing the ground. Take off the drain hose from the cabinet. Take the hose out of the fixing groove.

(See to Figure 2).

Embed the drain hose into the groove	Soft item
along the side of the spin tub in the order
of (1)~(3), heading for the side of the
spin tub. (See to Figure 3).
Embed the drain hose into the
groove with hands. Take care not	Extend to the
to damage the drain hose in	spin tub side

fastening the fixing clamp.

Figure 2

Figure 3

Embed into the groove in turn

Install the water inlet hose; Select the water level

Insert the water inlet hose into the	water-filling
entrance on the control panel
To dismantle the water inlet pipe,			Water inlet hose
just push the control handle as indicated in the
figure and pull it out		Water level	Water inlet
		indicator
	Maximum	Max
Select water level according to the
quantity of the laundries.	Medium	Med
Set the water level adjusting lever	Minimum	Min
to needed line.

5