About TurboCool.™

Installation Instructions Operating Instructions Safety Instructions

How it Works

TurboCool™ rapidly cools the refrigerator compartment in order to more quickly cool foods. Use TurboCool when adding a large amount of food to the refrigerator compartment, putting away foods after they have been sitting out at room temperature or when putting away warm leftovers. It can also be used if the refrigerator has been without power for an extended period.

Once activated, the compressor will turn on immediately and the fans will cycle on and off at high speed as needed for eight hours. The compressor will continue to run until the refrigerator compartment cools to approximately 34°F (1°C), then it will cycle on and off to maintain this setting. After

8 hours, or if TurboCool is pressed again, the refrigerator compartment will return to the original setting.

How to Use

LCD Models:

Access By: Home > Options > Refrigerator Options > TurboCool

Activate By: Pressing ON.

Deactivate By: Pressing OFF.

Non-LCD Models:

Press TurboCool. The refrigerator temperature display will show TC.

After TurboCool is complete, the refrigerator compartment will return to the original setting.

NOTES:

The refrigerator temperature cannot be changed during TurboCool.

The freezer temperature is not affected during TurboCool.

When opening the refrigerator door during TurboCool, the fans will continue to run if they have cycled on.

About ClimateKeeper2.™

Consumer Support Troubleshooting Tips

6

How it Works

The ClimateKeeper2™ is the industry’s most advanced refrigeration system, delivering optimum temperature and humidity performance to keep food garden fresh longer and reduce freezer burn, while maintaining E star-level efficiency.

The ClimateKeeper2 system features

two evaporators—one for the refrigerator and one for the freezer.

This provides two separate cooling systems, and separates the airflow between the fresh food and freezer compartments during normal cooling operations.*

This ensures that the humidity levels in the fresh food compartment are significantly higher than in a conventional system,** allowing fresh produce and other unsealed foods to retain their moisture content and freshness longer. Moisture sensitive foods such as fresh fruit, salads, rice, etc., can now be stored on open shelves without excessive

moisture loss. Due to the higher humidity in the refrigerator, you may on occasion experience fog or small amounts of moisture in the refrigerator compartment. This is normal and may come and go as different food loads and environmental conditions change. Wipe dry with a paper towel if desired.

The separate airflow system minimizes the mixing of air between the two compartments, which reduces fresh food odor transfer to improve the taste of ice.

The ClimateKeeper2 system also reduces the number of defrosting cycles in the freezer evaporator, thereby reducing freezer burn.

*Freezer air is used in the CustomCool feature.

**Testing shows a higher level of humidity in the Fresh Food section in ClimateKeeper2 refrigerators versus conventional units.

Page 5 Page 7
Page 6
Image 6
GE 200D8074P017 installation instructions About TurboCool, About ClimateKeeper2, How it Works, How to Use LCD Models
Page 5 Page 7

200D8074P017 specifications

The GE 200D8074P017 is a critical component widely recognized in various industrial applications, particularly in the realm of electrical equipment and control systems. This component is part of GE’s extensive catalog of robust and reliable products which are designed to meet the dynamic demands of modern engineering.

One of the standout features of the GE 200D8074P017 is its exceptional build quality. The device is manufactured with high-grade materials that ensure durability and longevity, making it suitable for harsh industrial environments. This component is designed to withstand considerable temperature fluctuations and is resistant to corrosion, further enhancing its performance in demanding conditions.

The technological advancements integrated into the GE 200D8074P017 are significant. This component typically incorporates state-of-the-art electronic circuitry which aids in precise control and monitoring. Its advanced sensor technology enables accurate feedback for various operational parameters, allowing for real-time adjustments and enhanced reliability.

Another notable characteristic of the GE 200D8074P017 is its compatibility with various systems. It can be seamlessly integrated into different control systems and machinery, making it a versatile choice for engineers and manufacturers. Whether in manufacturing, energy, or automation, its adaptability ensures it meets the specific needs of different projects and applications.

Additionally, the GE 200D8074P017 is designed with energy efficiency in mind. The technology employed helps minimize energy consumption while maintaining optimal performance levels. This focus on efficiency not only reduces operating costs but also supports sustainable practices in industrial operations.

The component also features user-friendly interfaces, which facilitate easy monitoring and maintenance. With straightforward installation processes and clear operational guidelines, it ensures that operators can manage and troubleshoot the system with minimal downtime.

In conclusion, the GE 200D8074P017 stands out in the marketplace due to its durable construction, advanced technologies, and versatile compatibility. It represents GE’s commitment to providing innovative solutions that address the evolving challenges of industrial applications. For engineers and businesses seeking reliability and performance, the GE 200D8074P017 is undoubtedly an asset worth considering.
Top Page Image Contents