GE 200D8074P017 Inserting the door panels, Troubleshooting Tips Consumer Support

Inserting the door panels.

Read these instructions completely and carefully.

Insert the Freezer Panel and Fresh Food Panel.

Carefully push the freezer panel in until it slides	If your model has a dispenser, this step only applies
into the slot behind the door handle. Push the filler	to the fresh food panel and top freezer panel.
panel (required with some door panels) in behind
the decorator panel. Repeat for fresh food panel.

Insert the Bottom Freezer Panel (on dispenser models).

Carefully push the panel in until it slides into the	(required with some door panels) in behind the
slot behind the door handle. Push the filler panel	decorator panel.

Attach the Top Trim on the Freezer and Fresh Food Doors.

The Top Trim can be found inside the refrigerator	each door. Hand tighten only. Make sure that the
compartment.	top of each panel fits snugly behind the lip of the
With a T-20 Torxdriver, attach the Top Trim, using	Top Trim.
two screws on each Top Trim piece, to the top of

Top Trim Screws

Cut-Out

Top Trim Screws

Safety Instructions Operating Instructions Installation Instructions

Cut-Out

Top

Freezer

Panel

Bottom

Freezer

Panel

Side Trim

Fresh

Food

Panel

Side Trim

21

Troubleshooting Tips Consumer Support