About the ice and water dispenser. (on some models)

ge.com

Safety

 

To Use the Dispenser

 

Select CUBED, CRUSHED or WATER.

 

Press the glass gently against the top of the

 

dispenser cradle.

 

The spill shelf is not self-draining. To reduce

 

water spotting, the shelf and its grille should be

 

cleaned regularly.

 

If no water is dispensed when the refrigerator is first

 

installed, there may be air in the water line system. Press

 

the dispenser arm for at least two minutes to remove

 

trapped air from the water line and to fill the water

 

system. To flush out impurities in the water line, throw

Spill Shelf

away the first six glassfuls of water.

CAUTION: Never put fingers or any other objects into

 

 

the ice crusher discharge opening.

 

Locking the Dispenser

 

Press the LOCK pad for 3 seconds to lock the

 

dispenser and control panel. To unlock, press

 

and hold the pad again for 3 seconds.

Dispenser Light

The LIGHT pad turns the night light in the dispenser on and off. The light also comes on when the dispenser cradle is pressed. On some models, if this light burns out, it should be replaced with a 6 watt 12V maximum bulb.

Door Alarm

Use Door Alarm to sound if either door is open for more than 3 minutes. The alarm will stop once the door is closed. For LCD models, a popup screen will appear. The alarm can be silenced by touching the LCD screen.

LCD Models:

Access By: Home > Options > Information and Settings > Settings > Door Alarm

Access By: Pressing ON.

Deactivate By: Pressing OFF.

Non-LCD Models:

Press the DOOR ALARM pad until the indicator light comes on.

Instructions Operating Instructions

Quick Ice

When you need to speed up ice production, use the Quick Ice feature. While this feature is turned on, the freezer fan runs continuously for 48 hours, or until the feature is turned OFF. During this period, ice production will increase up to 40%. Models with the integrated ice feature system require at FIRST USE at least half an 8 oz. glass of ice to be dispensed every 6 to 12 hours. This will help the icemaker fill the bucket properly

so that dispensing is better.

How to Use

LCD Models:

Access by: Home > Options > Freezer Options > Quick Ice

Activate by: Pressing ON.

Deactivate by: Pressing OFF.

Non-LCD Models:

Press the QUICK ICE pad to turn the feature ON. Press the pad again to turn the feature OFF.

Precise Fill (on some models)

This water dispenser is equipped with a feature called “precise fill.” This feature allows you to choose a precise amount of water (cups or ounces) that you would like dispensed. Pints and Liters are also available for LCD models.

LCD Models

Access By: Home > Options > Dispenser Options > Precise Fill > Set Amount

Activate By: Using the arrow buttons to select the desired amount. Press MORE UNITS to select between CUPS, OUNCES, PINTS or LITERS.

Non-LCD Models

Press the WATER pad.

Press the CUPS or OUNCES pad.

Select the precise amount of water you would like dispensed.

If you selected OUNCES, press the arrow pads on either side of the display to select the number of ounces you would like to have dispensed between

1–99 ounces.

If you selected CUPS, press the arrow pads on the left of the display to select the whole cups (1–16 cups) and/or the arrow pads on the right side of the display to select fractions of a cup (1/4–3/4 cups).

Press the cup against the cradle and water will begin dispensing. It will automatically stop when the amount set has been dispensed. The display will show there

is no water left to dispense, then reset.

NOTE: Do not leave the dispenser unattended when water is being dispensed.

If you would like to stop dispensing water before the specified amount has been dispensed, just remove the cup from the cradle. The display will show the amount left to dispense.

15

Installation Instructions Troubleshooting Tips Consumer Support

Page 15
Image 15
GE 200D8074P017 installation instructions About the ice and water dispenser. on some models

200D8074P017 specifications

The GE 200D8074P017 is a critical component widely recognized in various industrial applications, particularly in the realm of electrical equipment and control systems. This component is part of GE’s extensive catalog of robust and reliable products which are designed to meet the dynamic demands of modern engineering.

One of the standout features of the GE 200D8074P017 is its exceptional build quality. The device is manufactured with high-grade materials that ensure durability and longevity, making it suitable for harsh industrial environments. This component is designed to withstand considerable temperature fluctuations and is resistant to corrosion, further enhancing its performance in demanding conditions.

The technological advancements integrated into the GE 200D8074P017 are significant. This component typically incorporates state-of-the-art electronic circuitry which aids in precise control and monitoring. Its advanced sensor technology enables accurate feedback for various operational parameters, allowing for real-time adjustments and enhanced reliability.

Another notable characteristic of the GE 200D8074P017 is its compatibility with various systems. It can be seamlessly integrated into different control systems and machinery, making it a versatile choice for engineers and manufacturers. Whether in manufacturing, energy, or automation, its adaptability ensures it meets the specific needs of different projects and applications.

Additionally, the GE 200D8074P017 is designed with energy efficiency in mind. The technology employed helps minimize energy consumption while maintaining optimal performance levels. This focus on efficiency not only reduces operating costs but also supports sustainable practices in industrial operations.

The component also features user-friendly interfaces, which facilitate easy monitoring and maintenance. With straightforward installation processes and clear operational guidelines, it ensures that operators can manage and troubleshoot the system with minimal downtime.

In conclusion, the GE 200D8074P017 stands out in the marketplace due to its durable construction, advanced technologies, and versatile compatibility. It represents GE’s commitment to providing innovative solutions that address the evolving challenges of industrial applications. For engineers and businesses seeking reliability and performance, the GE 200D8074P017 is undoubtedly an asset worth considering.