GE 200D8074P017 Replacing the light bulbs, Instructions, Safety, Freezer Compartment

Models: 200D8074P017

1 132
Download 132 pages 4.3 Kb
Page 18
Image 18
Replacing the light bulbs.

Instructions

Replacing the light bulbs.

Setting the controls to OFF does not remove power to the light circuit.

Not all features are on all models.

Safety

Your light shield will look like one of the following:

Refrigerator Compartment—Upper Light

Instructions

Tabs

Safety Unplug the refrigerator.

Refrigerator Compartment—Upper Light The bulbs are located at the top of the

compartment, inside the light shield.

On some models, a screw at the front of

the light shield will have to be removed.

On other models, the screw is located in the pocket located at the back of the light shield.

Instructions After replacing the bulb with an appliance bulb of the same or lower wattage, replace the light shield and screws (on some models). When replacing the light shield, make sure that the tabs at the back of the shield fit into the slots at the back of the light shield housing.

Instructions Operating

OR

To remove the light shield, on some

Plug the refrigerator back in.

 

 

models, press in on the tabs on the sides of the shield and slide forward and out. On other models, just slide

the shield forward and out.

Pocket

Refrigerator Compartment—Lower Light

Tips Installation

This light is located above the top drawer.

Refrigerator Compartment—Lower Light Unplug the refrigerator.

This light is located above the top drawer. Remove the convertible meat drawer control knob by pulling straight out.

Freezer Compartment Lift the light shield up and pull it out.

Dispenser (on some models) After replacing the bulb with an appliance bulb of the same or lower wattage, replace the shield and the knob.

Manual background Plug the refrigerator back in.

Troubleshooting

Freezer Compartment

Manual background Unplug the refrigerator.

Manual background Remove the shelf just above the light shield. (The shelf will be easier to remove if it is emptied first.) On some models, a screw at the top of the light shield will need to be removed.

Manual background To remove the light shield, press in on the sides, and lift up and out.

Manual background Replace the bulb with an appliance bulb of the same or lower wattage, and reinstall the light shield. When reinstalling the light shield, make sure the top tabs snap securely into place. Replace the screw

(on some models).

Manual background Reinstall the shelf and plug the refrigerator back in.

Consumer Support

Dispenser (on some models)

 

Unplug the refrigerator.

Replace the bulb with a bulb of the

The bulb is located on the dispenser

same size and wattage.

 

under the control panel.

Plug the refrigerator back in.

Remove the light bulb by turning

 

it counterclockwise.

 

18

Page 18
Image 18
GE 200D8074P017 Replacing the light bulbs, Instructions, Safety, Refrigerator Compartment-Upper Light, Freezer Compartment