Installation Instructions

WHAT YOU WILL NEED (CONT.)

NOTE: The only GE approved plastic tubing is that supplied in GE SmartConnect™ Refrigerator Tubing kits. Do not use any other plastic water supply line because the line is under pressure at all times. Certain types of plastic will crack or rupture with age and cause water damage to your home.

•A GE water supply kit (containing tubing, shutoff valve and fittings listed below) is available at extra cost from your dealer or from Parts and Accessories, 800.626.2002 (in Canada 1.888.261.3055).

•A cold water supply. The water pressure must be between 20 and 120 p.s.i. (1.4–8.1 bar).

•Power drill.

•1/2″ or adjustable wrench.

•Straight and Phillips blade screwdriver.

•Two 1/4 ″ outer diameter compression nuts and 2 ferrules (sleeves)—to connect the copper tubing to the shutoff valve and the refrigerator water valve.

OR

•If you are using a GE SmartConnect™ Refrigerator Tubing kit, the necessary fittings are preassembled to the tubing.

•If your existing copper water line has a flared fitting at the end, you will need an adapter (available at plumbing supply stores) to connect the water line to the refrigerator OR you can cut off the flared fitting with a tube cutter and then use a compression fitting. Do not cut formed end from GE SmartConnect™ Refrigerator tubing.

•Shutoff valve to connect to the cold water line. The shutoff valve should have a water

inlet with a minimum inside diameter of 5/32″ at the point of connection to the COLD WATER LINE. Saddle-type shutoff valves are included in many water supply kits. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes.

Install the shutoff valve on the nearest frequently used drinking water line.

1SHUT OFF THE MAIN WATER SUPPLY

Turn on the nearest faucet long enough to clear the line of water.

2CHOOSE THE VALVE LOCATION

Choose a location for the valve that is easily accessible. It is best to connect into the side of a vertical water pipe. When it is necessary to connect into a horizontal water pipe, make the connection to the top or side, rather than at the bottom,

to avoid drawing off any sediment from the water pipe.

3DRILL THE HOLE FOR THE VALVE

Drill a 1/4″ hole in the water pipe (even if using a self-piercing valve), using a sharp bit. Remove any burrs resulting from drilling the hole in the pipe.

Take care not to allow water to drain into the drill.

Failure to drill a 1/4″ hole may result in reduced ice production or smaller cubes.

33

Page 32 Page 34
Page 33
Image 33
GE 200D8074P017 Shut OFF the Main Water Supply, Choose the Valve Location, Drill the Hole for the Valve
Page 32 Page 34

200D8074P017 specifications

The GE 200D8074P017 is a critical component widely recognized in various industrial applications, particularly in the realm of electrical equipment and control systems. This component is part of GE’s extensive catalog of robust and reliable products which are designed to meet the dynamic demands of modern engineering.

One of the standout features of the GE 200D8074P017 is its exceptional build quality. The device is manufactured with high-grade materials that ensure durability and longevity, making it suitable for harsh industrial environments. This component is designed to withstand considerable temperature fluctuations and is resistant to corrosion, further enhancing its performance in demanding conditions.

The technological advancements integrated into the GE 200D8074P017 are significant. This component typically incorporates state-of-the-art electronic circuitry which aids in precise control and monitoring. Its advanced sensor technology enables accurate feedback for various operational parameters, allowing for real-time adjustments and enhanced reliability.

Another notable characteristic of the GE 200D8074P017 is its compatibility with various systems. It can be seamlessly integrated into different control systems and machinery, making it a versatile choice for engineers and manufacturers. Whether in manufacturing, energy, or automation, its adaptability ensures it meets the specific needs of different projects and applications.

Additionally, the GE 200D8074P017 is designed with energy efficiency in mind. The technology employed helps minimize energy consumption while maintaining optimal performance levels. This focus on efficiency not only reduces operating costs but also supports sustainable practices in industrial operations.

The component also features user-friendly interfaces, which facilitate easy monitoring and maintenance. With straightforward installation processes and clear operational guidelines, it ensures that operators can manage and troubleshoot the system with minimal downtime.

In conclusion, the GE 200D8074P017 stands out in the marketplace due to its durable construction, advanced technologies, and versatile compatibility. It represents GE’s commitment to providing innovative solutions that address the evolving challenges of industrial applications. For engineers and businesses seeking reliability and performance, the GE 200D8074P017 is undoubtedly an asset worth considering.
Top Page Image Contents