Instructions

About the automatic icemaker.

A newly installed refrigerator may take 12 to 24 hours to begin making ice.

Tips Installation Instructions Operating Instructions Safety

On dispenser models, to access ice or reach the power switch:

Lift the bin, then pull it forward until the bin stops.

Lower the bin to access ice or reach the power switch.

NOTE: In order to take full advantage of the tilt-out ice bin, only store items on the shelf below the ice bin that are no taller than the lowest point on the bin.

Automatic Icemaker

The icemaker will produce seven cubes per cycle—approximately 100–130 cubes in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other use conditions.

If the refrigerator is operated before the water connection is made to the icemaker, set the power switch in the O (off) position.

When the refrigerator has been connected to the water supply, set the power switch to the l (on) position.

The icemaker will fill with water when it cools to 15°F (–10°C). A newly installed refrigerator may take 12 to 24 hours to begin making ice cubes.

You will hear a buzzing sound each time the icemaker fills with water.

Throw away the first few batches of ice to allow the water line to clear.

Be sure nothing interferes with the sweep of the feeler arm.

When the bin fills to the level of the feeler arm, the icemaker will stop producing ice. It is normal for several cubes to be joined together.

If ice is not used frequently, old ice cubes will become cloudy, taste stale and shrink.

Special note about dispenser models:

■Dispenser models have a tilt-out ice bin. The bin can be tilted out as shown in the illustrations, and it will hold itself up while you take ice out or turn the icemaker power switch on and off. Be sure to put the bin back in place before closing the door.

■To restore your ice level from an empty bucket stage, the following steps are recommended:

12 hours after the first batch of ice has fallen into the bin, dispense 3 to 4 cubes.

After an additional 6 hours, dispense 3 to 4 cubes again.

These steps will restore your ice level in the shortest amount of time.

Power

Switch

Icemaker

Green

 

Power Light

Feeler Arm

 

NOTE: In homes with lower-than-average water pressure, you may hear the icemaker cycle multiple times when making one batch of ice.

Troubleshooting

Lift the bin, then pull it forward until the bin stops.

Removing Ice Bin (dispenser models)

CAUTION: The ice bin is heavy when full.

Set the power switch to the O (off) position before removing the bin.

When replacing the bin, be sure to press it firmly into place. If it does not go all the way back, remove it and rotate the drive mechanism 1/4 turn. Then push the bin back again.

Rotate

Drive Mechanism

Consumer Support

Dispenser Models only

Lift and pull forward again to remove the bin.

14

Page 13 Page 15
Page 14
Image 14
GE 200D8074P017 About the automatic icemaker, Automatic Icemaker, Special note about dispenser models
Page 13 Page 15

200D8074P017 specifications

The GE 200D8074P017 is a critical component widely recognized in various industrial applications, particularly in the realm of electrical equipment and control systems. This component is part of GE’s extensive catalog of robust and reliable products which are designed to meet the dynamic demands of modern engineering.

One of the standout features of the GE 200D8074P017 is its exceptional build quality. The device is manufactured with high-grade materials that ensure durability and longevity, making it suitable for harsh industrial environments. This component is designed to withstand considerable temperature fluctuations and is resistant to corrosion, further enhancing its performance in demanding conditions.

The technological advancements integrated into the GE 200D8074P017 are significant. This component typically incorporates state-of-the-art electronic circuitry which aids in precise control and monitoring. Its advanced sensor technology enables accurate feedback for various operational parameters, allowing for real-time adjustments and enhanced reliability.

Another notable characteristic of the GE 200D8074P017 is its compatibility with various systems. It can be seamlessly integrated into different control systems and machinery, making it a versatile choice for engineers and manufacturers. Whether in manufacturing, energy, or automation, its adaptability ensures it meets the specific needs of different projects and applications.

Additionally, the GE 200D8074P017 is designed with energy efficiency in mind. The technology employed helps minimize energy consumption while maintaining optimal performance levels. This focus on efficiency not only reduces operating costs but also supports sustainable practices in industrial operations.

The component also features user-friendly interfaces, which facilitate easy monitoring and maintenance. With straightforward installation processes and clear operational guidelines, it ensures that operators can manage and troubleshoot the system with minimal downtime.

In conclusion, the GE 200D8074P017 stands out in the marketplace due to its durable construction, advanced technologies, and versatile compatibility. It represents GE’s commitment to providing innovative solutions that address the evolving challenges of industrial applications. For engineers and businesses seeking reliability and performance, the GE 200D8074P017 is undoubtedly an asset worth considering.
Top Page Image Contents