About QuickFreeze.™(on some models)

ge.com

Safety

QuickFreeze Plate

The QuickFreeze plate is only to be used with the QuickFreeze feature. Use QuickFreeze to freeze items faster to enhance food preservation.

How to Use

Place food (wrapped in plastic wrap) on QuickFreeze plate. Turn the feature on via the LCD controls.

LCD Models:

Access By: Home > Options > Freezer Options > QuickFreeze

Activate By: Using the arrows to select the time and pressing Enter.

Deactivate By: Pressing OFF.

NOTE: While the QuickFreeze feature is enabled, the actual freezer temperature may drop as low as –3°F (–19°C). This is normal.

Instructions Operating

About the water filter.

Cartridge

Holder

Place the top of the cartridge up inside the cartridge holder and slowly turn it to the right.

Filter

Bypass

Plug

SmartWater

Water Filter Cartridge

The water filter cartridge is located in the back upper right corner of the refrigerator compartment.

When to Replace the Filter

LCD Models:

A pop-up screen will appear on the LCD screen to remind you to replace the water filter. You can check the status of the water filter manually.

Access By: Home > Options > Dispenser Options > Reset Water Filter

Non-LCD Models:

There is a replacement indicator light for the water filter cartridge on the dispenser. This light will turn orange to tell you that you need to replace the filter soon.

The filter cartridge should be replaced when the replacement indicator light turns red or if the flow of water to the dispenser or icemaker decreases.

Removing the Filter Cartridge

If you are replacing the cartridge, first remove the old one by slowly turning it to the left. Do not pull down on the cartridge. A small amount of water may drip down.

Installing the Filter Cartridge

There is an adapter attached to the top of the new filter cartridge.

The adapter must be removed before installing the cartridge. To remove the adapter, turn it to the left about 1/4 turn.

Fill the replacement cartridge with water from the tap to allow for better flow from the dispenser immediately after installation.

Line up the arrow on the cartridge and the cartridge holder. Place the top of the new cartridge up inside the holder. Do not push it up into the holder.

Slowly turn it to the right until the filter cartridge stops. DO NOT OVERTIGHTEN. As you turn the cartridge, it will automatically raise itself into position. The cartridge will rotate about 1/2 turn.

Run water from the dispenser for 5 minutes to clear the system and prevent sputtering.

LCD Models:

Press FILTER REPLACED button to confirm replacement.

Non-LCD Models:

Press and hold the RESET FILTER pad (on some models) on the dispenser for 3 seconds.

NOTE: A newly installed water filter cartridge may cause water to spurt from the dispenser.

Filter Bypass Plug

You must use the filter bypass plug when a replacement filter cartridge is not available. The dispenser and the icemaker will not operate without the filter or filter bypass plug.

Replacement Filters:

To order additional filter cartridges in the United States, visit our Website, ge.com, or call GE Parts and Accessories, 800.626.2002.

MSWF

Suggested Retail $36.95–$41.95 USD

Customers in Canada should consult

the yellow pages for the nearest Mabe Service Center.

9

Instructions Installation Instructions Troubleshooting Tips Consumer Support

Page 8 Page 10
Page 9
Image 9
GE 200D8074P017 installation instructions About QuickFreeze.on some models, About the water filter
Page 8 Page 10

200D8074P017 specifications

The GE 200D8074P017 is a critical component widely recognized in various industrial applications, particularly in the realm of electrical equipment and control systems. This component is part of GE’s extensive catalog of robust and reliable products which are designed to meet the dynamic demands of modern engineering.

One of the standout features of the GE 200D8074P017 is its exceptional build quality. The device is manufactured with high-grade materials that ensure durability and longevity, making it suitable for harsh industrial environments. This component is designed to withstand considerable temperature fluctuations and is resistant to corrosion, further enhancing its performance in demanding conditions.

The technological advancements integrated into the GE 200D8074P017 are significant. This component typically incorporates state-of-the-art electronic circuitry which aids in precise control and monitoring. Its advanced sensor technology enables accurate feedback for various operational parameters, allowing for real-time adjustments and enhanced reliability.

Another notable characteristic of the GE 200D8074P017 is its compatibility with various systems. It can be seamlessly integrated into different control systems and machinery, making it a versatile choice for engineers and manufacturers. Whether in manufacturing, energy, or automation, its adaptability ensures it meets the specific needs of different projects and applications.

Additionally, the GE 200D8074P017 is designed with energy efficiency in mind. The technology employed helps minimize energy consumption while maintaining optimal performance levels. This focus on efficiency not only reduces operating costs but also supports sustainable practices in industrial operations.

The component also features user-friendly interfaces, which facilitate easy monitoring and maintenance. With straightforward installation processes and clear operational guidelines, it ensures that operators can manage and troubleshoot the system with minimal downtime.

In conclusion, the GE 200D8074P017 stands out in the marketplace due to its durable construction, advanced technologies, and versatile compatibility. It represents GE’s commitment to providing innovative solutions that address the evolving challenges of industrial applications. For engineers and businesses seeking reliability and performance, the GE 200D8074P017 is undoubtedly an asset worth considering.
Top Page Image Contents