XS Scuba Buoyancy Compensator manual

BC Owner’s Manual 5.

Introduction

Thank you for choosing XS Scuba. Your new BC has been designed, manufactured and individually tested to ensure that it consistently meets the highest performance and safety standards possible. This Owner’s Manual describes the unique functions and features of XS Scuba’s BC equipment and various optional accessories. By following the instructions in this manual, you will understand how your BC works, how to make best use of its features, and how to ensure that it lasts a long time. It is very important to take the time to read the instructions provided in this manual. If you have any questions, please consult your Authorized XS Scuba Dealer.

Intended Use & Function of Your BC

The main purpose for wearing a Buoyancy Compensator is to achieve and maintain neutral buoyancy at all times while you are underwater, regardless of changes in depth or cylinder pressure. This allows you to be much more relaxed while you dive – and safer – since you won’t need to struggle against the forces of positive and negative buoyancy. Modern jacket and back inﬂation style BC’s provide the most effective and streamlined buoyancy control, since they are speciﬁcally designed to support the diver in a comfortably balanced, face-down position while swimming underwater. Stress and exertion can now be minimized, if not eliminated altogether.

Since the introduction of the jacket style and back inﬂation designs, the modern BC has evolved into a consolidated harness and pack system that carries the cylinder and serves as a ﬁxture point for ﬁrst stage regulators, instrumentation, and accessories. For even greater convenience and comfort, many models are now available with integrated weight systems that can supplement or replace the weight belt.

Your BC can also provide you with non-emergency ﬂotation to help you rest on the surface, but you should never rely on it to function as a life preserver or personal ﬂotation device (PFD). In order to meet approval by U.S. Coast Guard regulations, a PFD must be designed so that it automatically rights you to a face-up position and supports your head out of the water on the surface to prevent drowning. The design characteristics and intended function of a PFD are therefore very different from those of a BC, since a PFD is speciﬁcally designed to function on the surface and a BC is primarily designed to function underwater.

It is important to remember that other equipment you wear in addition to your BC, including your cylinder, exposure suit, or weight system, will also affect your position in the water. An empty cylinder, for instance, can create counter-buoyancy that could roll you into a face down position if you were to lose consciousness.

For this reason, XS Scuba recommends that you always dive with a buddy, and remain close enough to them to be able to render assistance to each other in the event of an emergency. Do not depend on your BC, exposure suit, or any other equipment to hold your face above the surface in the event that you are rendered unconscious in the water while diving.

XS Scuba, Inc