6.Attach the clevis pin (219) to the clevis pin tool. Insert clevis pin through hole in lube cylinder and into the left clevis.
7.Gently tap end of clevis pin tool with hammer to slide clevis pin (219) into place. Remove clevis pin tool from clevis pin.
8.Insert four hex head cap screws (203) through holes in proportioning pump (202) and partially screw into spacers (113) in hydraulic cylinder (201).
9.With the four hex head cap screws in place but not tightened, slide the proportioning pump against the hydraulic cylinder.
Repair
10.Clamp the hydraulic cylinder and proportioning pump assembly to the flat surface so the proportion- ing pump and hydraulic cylinder will not twist when tightened against each other.
11.Tighten the hex head cap screws in a
12.Repeat steps
13.Install plug fitting (206) into lube cylinder (205).
14.Use grease pump to apply grease to grease fittings (35) in proportioning pumps.
312068M | 5 |