Humminbird 3D manual Step Six Route the Cable

Page 11

INSTALLATION

TRANSOM INSTALLATION

Step Six - Route the Cable

There are several ways to route the transducer cable to the to the area where the control head will be installed. The most common procedure routes the cable through the transom into the boat.

Inside the boat there is often a channel or conduit used for other wiring that the cable can be routed along. Do not cut or shorten the transducer cable and try not to damage the cable insulation. Route the cable as far as practical from the VHF radio antenna cables or tachometer cable to reduce the possibility of interference.

If the cable is too short, extension cables are available to extend the transducer cable up to a total of 50' (15 m). Call Humminbird Customer Support for more information.

Follow these steps to route the cable through the transom:

1.Drill a 5/8” (16mm) hole above the water line. Route the cable through the hole.

2.Fill the hole with silicone sealant.

3.Place the escutcheon plate over the hole and attach with the two #8 x 5/8” (16mm) screws.

4.Secure the cable by attaching the cable camp to the transom using a #8 x 5/8” (16mm) screw.

Note: The transducer will pivot up to 90 degrees in the bracket. Allow enough slack in the cable for this movement. It is best to route the cable to the side of the transducer so the cable will not be damaged by the transducer during movement.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Page Parts Supplied AccessoriesInstallation Overview Determining How to Mount the Transducer Thru-Hull Mounting Alternate Transducers and Mounting MethodsPortable Mounting Trolling Motor MountingTransducer Exchange Beginning InstallationStep One Determine Where to Mount the Transducer Transom InstallationStep Three Assemble the Transducer Step Two Drill the Mounting HolesPage Confirm the pivot angle has not changed Step Five Adjust the Running Position of the TransducerStep Four Mount the Transducer to the Transom Page Step Six Route the Cable Step Two Test the Mounting Location Inside the Hull InstallationStep One Determine the Mounting Location Page Step Three Permanently Mount the Transducer Step Two Connect the Power Cable to the Boat Control Head InstallationStep One Determine Where to Mount Page Step Four Run the Cables Step Three Drill the Mounting HolesPage Your Humminbird is now ready for operation Step Five Assembling the Connector HolderTest the Installation Testing the Installation Feature Memory Page Page Page Page Control Functions Page Page Page Page Page Page Page Page Page Page Page Page Using Diagnostic Page Using Alternative Transducers

3D specifications

Humminbird 3D is a groundbreaking sonar technology that has revolutionized the way anglers and marine enthusiasts navigate and fish under the surface of water. Utilizing advanced imaging techniques, this system provides an unparalleled view of underwater structures, fish, and other elements, making it a vital tool for any serious angler.

At its core, Humminbird 3D employs a proprietary sonar technology that combines traditional 2D sonar with sophisticated 3D mapping capabilities. This dual functionality allows users to visualize underwater environments in a way that was previously unimaginable. The 3D views offer depth perception, enabling anglers to identify ledges, drop-offs, and other crucial fishing spots with precision. Instead of just a flat representation, users can see the terrain's contours, making it easier to understand the underwater landscape.

One of the standout features of Humminbird 3D is its ability to create real-time three-dimensional maps. This allows users to dynamically adjust their strategies while fishing, as they can continually monitor how fish are interacting with their surroundings. Furthermore, the system boasts enhanced target separation capabilities, making it easier to distinguish between individual fish and structures.

Another key technology utilized in Humminbird 3D is its integration with the CHIRP (Compressed High-Intensity Radiated Pulse) sonar technology. This allows for clearer images and improved target resolution, providing comprehensive details about various underwater elements. The result is greater accuracy in identifying fish species and understanding their behavior in relation to underwater structures.

Humminbird 3D also features an easy-to-use interface, designed to be intuitive for users of all experience levels. The system can be seamlessly integrated into existing Humminbird products, enhancing the functionality of existing setups without requiring a complete overhaul. Additionally, it supports connectivity with other devices, allowing for the sharing of data and enhancing the overall fishing experience.

Durability and reliability are also characteristics inherent to the Humminbird 3D system. Designed for the harsh environments of marine use, it can withstand the rigors of fishing and boating, ensuring that users have a dependable tool at their disposal.

In summary, Humminbird 3D is a game-changer in the realm of sonar technology, providing anglers with unprecedented insights into underwater environments. Its combination of 3D mapping, CHIRP sonar, real-time monitoring, and user-friendly interface makes it a valuable asset for anyone looking to enhance their fishing experience and gain an edge on the water.
Top Page Image Contents