Humminbird 3D manual Step Three Permanently Mount the Transducer

Page 14

INSTALLATION

INSIDE THE HULL INSTALLATION

3.Power up the Control Head.

4.Run the boat at various speeds and water depths while observing the screen on the Control Head. If the unit functions well at low speeds but begins to skip or miss the bottom at higher speeds, the transducer needs to be moved. If depth performance is required, test the fishfinder in water at the desired depth. Test different locations in the hull until the optimum performance is achieved.

Step Three - Permanently Mount the Transducer

1.Once the mounting location is determined, mark the position of the transducer.

2.Remove the water from inside the hull and thoroughly dry the mounting surface. If the surface is excessively rough, it may be necessary to sand the area to provide a smooth mounting surface.

Ensure the mounting area is clear and dry.

3.Mix an ample quantity of two-part slow-cure epoxy slowly and thoroughly. Avoid trapping air bubbles.

4.Coat the face of the transducer and the inside of the hull (Figure 16).

5.Press the transducer into place with a slight twisting motion to purge any trapped air from underneath, keeping the pointed end of the transducer body pointed forward (Figure 17).

Note: Proper operation requires the pointed end of the transducer body to face towards the bow.

6. Weight the transducer so it does not move while the epoxy is curing.

When the epoxy cures, no water is necessary inside the hull. Neither water, spilled gasoline, or oil will affect the performance of the transducer.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page Parts Supplied AccessoriesInstallation Overview Determining How to Mount the Transducer Trolling Motor Mounting Alternate Transducers and Mounting MethodsPortable Mounting Thru-Hull MountingBeginning Installation Transducer ExchangeTransom Installation Step One Determine Where to Mount the TransducerStep Two Drill the Mounting Holes Step Three Assemble the TransducerPage Confirm the pivot angle has not changed Step Five Adjust the Running Position of the TransducerStep Four Mount the Transducer to the Transom Page Step Six Route the Cable Step Two Test the Mounting Location Inside the Hull InstallationStep One Determine the Mounting Location Page Step Three Permanently Mount the Transducer Step Two Connect the Power Cable to the Boat Control Head InstallationStep One Determine Where to Mount Page Step Three Drill the Mounting Holes Step Four Run the CablesPage Step Five Assembling the Connector Holder Your Humminbird is now ready for operationTest the Installation Testing the Installation Feature Memory Page Page Page Page Control Functions Page Page Page Page Page Page Page Page Page Page Page Page Using Diagnostic Page Using Alternative Transducers

3D specifications

Humminbird 3D is a groundbreaking sonar technology that has revolutionized the way anglers and marine enthusiasts navigate and fish under the surface of water. Utilizing advanced imaging techniques, this system provides an unparalleled view of underwater structures, fish, and other elements, making it a vital tool for any serious angler.

At its core, Humminbird 3D employs a proprietary sonar technology that combines traditional 2D sonar with sophisticated 3D mapping capabilities. This dual functionality allows users to visualize underwater environments in a way that was previously unimaginable. The 3D views offer depth perception, enabling anglers to identify ledges, drop-offs, and other crucial fishing spots with precision. Instead of just a flat representation, users can see the terrain's contours, making it easier to understand the underwater landscape.

One of the standout features of Humminbird 3D is its ability to create real-time three-dimensional maps. This allows users to dynamically adjust their strategies while fishing, as they can continually monitor how fish are interacting with their surroundings. Furthermore, the system boasts enhanced target separation capabilities, making it easier to distinguish between individual fish and structures.

Another key technology utilized in Humminbird 3D is its integration with the CHIRP (Compressed High-Intensity Radiated Pulse) sonar technology. This allows for clearer images and improved target resolution, providing comprehensive details about various underwater elements. The result is greater accuracy in identifying fish species and understanding their behavior in relation to underwater structures.

Humminbird 3D also features an easy-to-use interface, designed to be intuitive for users of all experience levels. The system can be seamlessly integrated into existing Humminbird products, enhancing the functionality of existing setups without requiring a complete overhaul. Additionally, it supports connectivity with other devices, allowing for the sharing of data and enhancing the overall fishing experience.

Durability and reliability are also characteristics inherent to the Humminbird 3D system. Designed for the harsh environments of marine use, it can withstand the rigors of fishing and boating, ensuring that users have a dependable tool at their disposal.

In summary, Humminbird 3D is a game-changer in the realm of sonar technology, providing anglers with unprecedented insights into underwater environments. Its combination of 3D mapping, CHIRP sonar, real-time monitoring, and user-friendly interface makes it a valuable asset for anyone looking to enhance their fishing experience and gain an edge on the water.
Top Page Image Contents