Humminbird Matrix 97 manual Sonar X-PressTMMenu, Sonar Views Only, To adjust the WideSide View

Page 37

Sonar X-PressTMMenu

(Sonar Views Only)

The Sonar X-PressTMmenu provides access to the settings most frequently-used. Press the MENU key once while in any of the Sonar Views to access the Sonar X-PressTMmenu.

NOTE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode or what transducer is currently selected.

Sonar X-PressTMMenu

WideSide View

(WideSide Transducer: WideSide View Only)

WideSide View sets which transducer beam from the WideSide Transducer is shown in the WideSide View. A WideSide transducer must be connected to the Matrix Fishing System. The WideSide View menu choice is available when Transducer Select is set to WideSide (see Sonar Menu Tab: Transducer Select) and can only be accessed from the Sonar X-PressTMmenu when you are in WideSide view.

NOTE: The WideSide View requires the purchase of the WideSide transducer. You can visit our website at www.humminbird.com to order this accessory online or contact our Customer Resource Center at 1-800-633-1468.

To adjust the WideSide View:

1.Make sure you are in WideSide Transducer Mode and that a WideSide transducer is connected, then highlight WideSide View on the Sonar X-PressTMmenu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the WideSide View setting. (L [Left], Both, R [Right], Default = Both)

33

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Table of Contents Navigation X-Press Menu Navigation Views Only Sonar X-Press Menu Sonar Views OnlySonar Menu Tab Setup Menu Tab Alarms Menu TabNavigation Menu Tab Accessories Menu Tab Troubleshooting DualBeam Plus Sonar How Sonar WorksQuadraBeam Sonar How GPS and Cartography Work WideSide SonarWith Optional-Purchase WideSide Transducer Multi-Media Card MMC HotMapsTM 2004 Gold ChartsBait Ball What’s On the Sonar DisplayTo your boat, including the following items KHz Orange Fish Symbol KHz Blue Fish SymbolSonar views ViewsSonar View Zoom ViewSonar View Sonar ViewReal Time Sonar RTS Window Understanding Sonar HistoryBottom Presentation Sonar Zoom View Sonar Zoom ViewBig Digits View 200/83 kHz Split Sonar View200/83 kHz Split Sonar View Big Digits ViewSide Beam View Side Beam ViewWideSide View WideSide ViewBird’s Eye View Bird’s Eye ViewChart View with Active Cursor Chart ViewCombo View Combo ViewView Orientation Chart View with Cursor PresentViewing Cartography Page Waypoints, Routes and Tracks Introduction to NavigationSave, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Chart View with Grid Chart View with TargetAdd a Waypoint Target or Trolling Grid Save, Edit or Delete a Route Edit, Delete or Hide Saved Tracks Save or Clear a Current TrackKey Functions Power KeyLight Key View KeyWAY Cursor Control Key Menu KeyMark Key View Preset KeyGoto Key Zoom +/- KeyPowering Up the Unit Accessory BusMatrix 97 Title Screen Menu System Main Menu System Normal User ModeSonar Tab, Normal Mode Sonar Tab, Advanced Mode Normal Operation Start-Up Options MenuSimulator Accessory Test Screen Self Test Accessory Test GPS Diagnostic ViewSystem Status System Status Self Test ScreenPC Connect GPS Diagnostic ViewWith PC Connect Cable Only Sonar X-PressTMMenu To adjust the WideSide ViewSonar Views Only Sonar X-PressTMMenuSensitivity To adjust the SensitivityHighlight Sensitivity on the Sonar X-PressTMmenu Upper Range To adjust the Upper RangeLower Range To adjust the Lower RangeHighlight Lower Range on the Sonar X-PressTMmenu To adjust the Side Beam Range Chart SpeedTo adjust the Chart Speed Highlight Chart Speed on the Sonar X-PressTMmenuBottom View To adjust the Bottom ViewHighlight Bottom View on the Sonar X-PressTMmenu Save Current Track Navigation X-PressTMMenuClear Current Track Save Current Route Cancel NavigationSkip Next Waypoint Remove Grid Remove TargetSonar Window Sonar Menu Sonar Menu TabTo use Beam Select Beam SelectHighlight Beam Select on the Sonar main menu To turn Fish ID+TM on or off Fish ID+TMTransducer Cone and Fish Arches KHz Sensitivity Fish SensitivityWideSide Sensitivity KHz BalanceDepth Lines To change the Depth Lines settingDepth Lines Surface Clutter To change the Surface Clutter settingSurface Clutter To change the Max Depth setting To change the Noise Filter settingNoise Filter Max DepthWater Type To change the Water Type settingTransducer Select To change the selected TransducerNavigation Menu Tab Tracks allows you to view the Tracks submenu TracksTo view the Tracks Submenu Highlight Tracks on the Navigation main menuTo view the Waypoints Submenu WaypointsHighlight Waypoints on the Navigation main menu Waypoints Submenu contains the following menu choicesRoutes To change the View Orientation settingTo view the Routes Submenu Routes Submenu contains the following menu choicesTo change the Chart Detail Level setting Chart Detail LevelTo change the Map Borders setting Map BordersSpot Soundings Lat/Lon GridShaded Depth North ReferenceTrackpoint Interval Grid RotationTrack Min Distance Set Simulation Position Map DatumSet Map Offset Delete All Nav Data Clear Map OffsetTo Clear Map Offset To Delete All Navigation DataFrom any view, press the Menu key twice to access the Main Alarms Menu TabAlarms Menu Fish ID Alarm Depth AlarmTo change the Depth Alarm setting To change the Fish ID Alarm settingOff Course Alarm Low Battery AlarmTo change the Low Battery Alarm setting To change the Off Course Alarm settingDrift Alarm Arrival AlarmAlarm Tone Setup Menu Tab Setup Menu TabUnits Temp Units DepthUnits Distance Units Speed User ModeLanguage Restore Defaults Triplog ResetTo Reset Triplog To Restore DefaultsTo Select Views Select ViewsSelect Views Advanced, Sonar View Only Select ReadoutsTo Select Readouts Temp Offset Depth OffsetSpeed Calibration Daylight Savings Time Local Time ZonePosition Format Date Format Time FormatAdvanced, International Only To change the Time FormatSonar Nmea OutputFollowing Nmea sentences are output To turn Nmea Output on or offAccessories Menu Tab Accessories Menu TabFishing System Doesn’t Power Up TroubleshootingProblem Possible Cause Display ProblemsIsolation Finding the Cause of NoiseBoat’s engine PropellerMatrix Fishing System Accessories Specifications Page Page Page Monday Friday 800 a.m. to 430 p.m. Central Standard Time Custserv@johnsonoutdoors.com

Matrix 97 specifications

The Humminbird Matrix 97 is a powerful fishfinder designed to enhance the fishing experience for anglers of all levels. This model combines advanced technology with user-friendly features, making it an essential tool for locating and catching fish in a variety of aquatic environments.

One of the standout features of the Matrix 97 is its 7-inch, full-color display. The screen offers a high-resolution image that provides clarity and detail, allowing anglers to easily interpret underwater structures, fish locations, and bottom contours. The large display also ensures that users can see multiple information readouts at once, making it easier to monitor and analyze data.

The Matrix 97 is equipped with DualBeam Plus sonar technology, which provides exceptional depth coverage and accurate fish detection. This feature includes two cone angles, allowing users to choose between a wider beam for scanning large areas and a narrow beam for pinpointing fish. With a maximum depth capability of 600 feet, the Matrix 97 can effectively scan both shallow and deep waters, making it versatile for various fishing conditions.

Another significant characteristic of the Matrix 97 is the built-in GPS capabilities. This fishfinder features a highly accurate GPS module, enabling anglers to mark waypoints, track routes, and navigate their favorite fishing spots with ease. The GPS functionality is complemented by Humminbird’s AutoChart technology, which allows users to create custom maps of their fishing areas by logging depth contours and vegetation. This feature is invaluable for enhancing fishing strategies and improving overall success on the water.

Additionally, the Matrix 97 is designed with user-friendly controls that simplify operation. The interface features a straightforward menu layout, making it easy to switch between sonar, GPS, and mapping functions. Anglers can easily adjust settings and configure the display to suit their preferences, ensuring a personalized experience while using the device.

Durability is also a key characteristic of the Matrix 97. Its rugged construction is built to withstand the rigors of outdoor use, ensuring longevity even in harsh conditions. The device is water-resistant, making it suitable for various weather situations encountered during fishing trips.

In summary, the Humminbird Matrix 97 stands out as a reliable and advanced fishfinder. With features like a vibrant display, DualBeam Plus sonar technology, built-in GPS, and customizable mapping capabilities, it provides anglers with the tools they need to enhance their fishing experience and increase their chances of a successful catch. Its durable design further ensures that it can meet the challenges of outdoor use, making the Matrix 97 a must-have for any serious angler.
Top Page Image Contents