Humminbird Comprehensive Guide to Operational Settings for the Matrix 97 GPS Fishing System
Page 62

Map Datum

(Advanced)

Map Datum allows you to change the map coordinate system used by the Matrix Fishing System to match those of a paper map.

To change the Map Datum setting:

1.Make sure you are in Advanced User Mode, then highlight Map Datum on the Navigation main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Map Datum setting. (Default = WGS 84)

Set Simulation Position

(Advanced)

Set Simulation Position allows you to set the position of the boat used in the Simulator.

To set the Simulation Position:

1.Activate the cursor and move it to the new coordinates.

2.Make sure you are in Advanced User Mode, then highlight Set Simulation Position on the Navigation main menu.

3.Use the RIGHT 4-WAY Cursor Control key to change the Simulation Position setting.

Set Map Offset

(Advanced)

Set Map Offset allows you to change the map offset used by the Matrix Fishing System.

NOTE: The Map Offset will be applied to all maps and not just the map that requires the correction. The Map Offset should be cleared if a different map is to be used.

To change the Map Offset setting:

1.Activate the cursor and move it location where the Map Offset will be applied.

2.Make sure you are in Advanced User Mode, then highlight Set Map Offset on the Navigation main menu.

3.Use the RIGHT 4-WAY Cursor Control key to set the Map Offset.

58

Page 61 Page 63
Image 62
Page 61 Page 63
Contents Table of Contents Sonar Menu Tab Sonar X-Press Menu Sonar Views OnlyNavigation X-Press Menu Navigation Views Only Navigation Menu Tab Alarms Menu TabSetup Menu Tab Accessories Menu Tab Troubleshooting QuadraBeam Sonar How Sonar WorksDualBeam Plus Sonar With Optional-Purchase WideSide Transducer WideSide SonarHow GPS and Cartography Work HotMapsTM 2004 Gold Charts Multi-Media Card MMCWhat’s On the Sonar Display Bait BallKHz Orange Fish Symbol KHz Blue Fish Symbol To your boat, including the following itemsSonar View ViewsSonar views Zoom ViewSonar View Sonar ViewUnderstanding Sonar History Real Time Sonar RTS WindowBottom Presentation Sonar Zoom View Sonar Zoom View200/83 kHz Split Sonar View 200/83 kHz Split Sonar ViewBig Digits View Big Digits ViewSide Beam View Side Beam ViewWideSide View WideSide ViewBird’s Eye View Bird’s Eye ViewCombo View Chart ViewChart View with Active Cursor Combo ViewViewing Cartography Chart View with Cursor PresentView Orientation Page Introduction to Navigation Waypoints, Routes and TracksSave, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Add a Waypoint Target or Trolling Grid Chart View with TargetChart View with Grid Save, Edit or Delete a Route Save or Clear a Current Track Edit, Delete or Hide Saved TracksLight Key Power KeyKey Functions View KeyMenu Key WAY Cursor Control KeyGoto Key View Preset KeyMark Key Zoom +/- KeyMatrix 97 Title Screen Accessory BusPowering Up the Unit Main Menu System Normal User Mode Menu SystemSonar Tab, Normal Mode Sonar Tab, Advanced Mode Simulator Start-Up Options MenuNormal Operation System Status Self Test Accessory Test GPS Diagnostic ViewAccessory Test Screen System Status Self Test ScreenWith PC Connect Cable Only GPS Diagnostic ViewPC Connect Sonar Views Only To adjust the WideSide ViewSonar X-PressTMMenu Sonar X-PressTMMenuHighlight Sensitivity on the Sonar X-PressTMmenu To adjust the SensitivitySensitivity To adjust the Upper Range Upper RangeHighlight Lower Range on the Sonar X-PressTMmenu To adjust the Lower RangeLower Range To adjust the Chart Speed Chart SpeedTo adjust the Side Beam Range Highlight Chart Speed on the Sonar X-PressTMmenuHighlight Bottom View on the Sonar X-PressTMmenu To adjust the Bottom ViewBottom View Clear Current Track Navigation X-PressTMMenuSave Current Track Skip Next Waypoint Cancel NavigationSave Current Route Sonar Window Remove TargetRemove Grid Sonar Menu Tab Sonar MenuHighlight Beam Select on the Sonar main menu Beam SelectTo use Beam Select Transducer Cone and Fish Arches Fish ID+TMTo turn Fish ID+TM on or off Fish Sensitivity KHz SensitivityKHz Balance WideSide SensitivityDepth Lines To change the Depth Lines settingDepth Lines Surface Clutter To change the Surface Clutter settingSurface Clutter Noise Filter To change the Noise Filter settingTo change the Max Depth setting Max DepthTransducer Select To change the Water Type settingWater Type To change the selected TransducerNavigation Menu Tab To view the Tracks Submenu TracksTracks allows you to view the Tracks submenu Highlight Tracks on the Navigation main menuHighlight Waypoints on the Navigation main menu WaypointsTo view the Waypoints Submenu Waypoints Submenu contains the following menu choicesTo view the Routes Submenu To change the View Orientation settingRoutes Routes Submenu contains the following menu choicesTo change the Map Borders setting Chart Detail LevelTo change the Chart Detail Level setting Map BordersShaded Depth Lat/Lon GridSpot Soundings North ReferenceTrack Min Distance Grid RotationTrackpoint Interval Set Map Offset Map DatumSet Simulation Position To Clear Map Offset Clear Map OffsetDelete All Nav Data To Delete All Navigation DataAlarms Menu Alarms Menu TabFrom any view, press the Menu key twice to access the Main To change the Depth Alarm setting Depth AlarmFish ID Alarm To change the Fish ID Alarm settingTo change the Low Battery Alarm setting Low Battery AlarmOff Course Alarm To change the Off Course Alarm settingAlarm Tone Arrival AlarmDrift Alarm Setup Menu Tab Setup Menu TabUnits Distance Units DepthUnits Temp Language User ModeUnits Speed To Reset Triplog Triplog ResetRestore Defaults To Restore DefaultsSelect Views Select ViewsTo Select Views To Select Readouts Select ReadoutsAdvanced, Sonar View Only Speed Calibration Depth OffsetTemp Offset Position Format Local Time ZoneDaylight Savings Time Advanced, International Only Time FormatDate Format To change the Time FormatFollowing Nmea sentences are output Nmea OutputSonar To turn Nmea Output on or offAccessories Menu Tab Accessories Menu TabTroubleshooting Fishing System Doesn’t Power UpDisplay Problems Problem Possible CauseBoat’s engine Finding the Cause of NoiseIsolation PropellerMatrix Fishing System Accessories Specifications Page Page Page Custserv@johnsonoutdoors.com Monday Friday 800 a.m. to 430 p.m. Central Standard Time

Matrix 97 specifications

The Humminbird Matrix 97 is a powerful fishfinder designed to enhance the fishing experience for anglers of all levels. This model combines advanced technology with user-friendly features, making it an essential tool for locating and catching fish in a variety of aquatic environments.

One of the standout features of the Matrix 97 is its 7-inch, full-color display. The screen offers a high-resolution image that provides clarity and detail, allowing anglers to easily interpret underwater structures, fish locations, and bottom contours. The large display also ensures that users can see multiple information readouts at once, making it easier to monitor and analyze data.

The Matrix 97 is equipped with DualBeam Plus sonar technology, which provides exceptional depth coverage and accurate fish detection. This feature includes two cone angles, allowing users to choose between a wider beam for scanning large areas and a narrow beam for pinpointing fish. With a maximum depth capability of 600 feet, the Matrix 97 can effectively scan both shallow and deep waters, making it versatile for various fishing conditions.

Another significant characteristic of the Matrix 97 is the built-in GPS capabilities. This fishfinder features a highly accurate GPS module, enabling anglers to mark waypoints, track routes, and navigate their favorite fishing spots with ease. The GPS functionality is complemented by Humminbird’s AutoChart technology, which allows users to create custom maps of their fishing areas by logging depth contours and vegetation. This feature is invaluable for enhancing fishing strategies and improving overall success on the water.

Additionally, the Matrix 97 is designed with user-friendly controls that simplify operation. The interface features a straightforward menu layout, making it easy to switch between sonar, GPS, and mapping functions. Anglers can easily adjust settings and configure the display to suit their preferences, ensuring a personalized experience while using the device.

Durability is also a key characteristic of the Matrix 97. Its rugged construction is built to withstand the rigors of outdoor use, ensuring longevity even in harsh conditions. The device is water-resistant, making it suitable for various weather situations encountered during fishing trips.

In summary, the Humminbird Matrix 97 stands out as a reliable and advanced fishfinder. With features like a vibrant display, DualBeam Plus sonar technology, built-in GPS, and customizable mapping capabilities, it provides anglers with the tools they need to enhance their fishing experience and increase their chances of a successful catch. Its durable design further ensures that it can meet the challenges of outdoor use, making the Matrix 97 a must-have for any serious angler.
Top Page Image Contents