Humminbird 767 manual Save, Edit or Delete a Route, Save or Clear a Current Track, Press menu

531427-1_C - 767_Man_Eng.qxd 10/25/2005 10:29 AM Page 36

	Add a Waypoint Target or Trolling Grid
	Add or Remove a Waypoint Target: From the Waypoints
Waypoint Target
	submenu, select Target and press the RIGHT Cursor key
	to display a list of waypoints. Select the waypoint you
	want to target. A target consisting of concentric circles
	centered on the selected waypoint will appear on all of
	the navigation views; the target shows various distance
	ranges from the targeted waypoint. To remove the
	target, choose Remove Target from the Navigation
	X-Press™ menu.

Chart View with Target

	Add or Remove a Trolling Grid: From the Waypoints
	submenu, select Grid and press the RIGHT Cursor key to
	display a list of waypoints. Select the waypoint to which
	you want to add the grid. The trolling grid will appear on all
Waypoint	of the navigation views, and can be used as a guide when
Trolling	trolling around a waypoint. The grid can be rotated to any
Grid
	desired heading using Grid Rotation from the Navigation
	Main menu. To remove the trolling grid, choose Remove
	Grid from the Navigation X-Press™ menu.

Chart View with Grid

NOTE: Only one waypoint can have either a target or a grid at one time. If you apply a target or a grid to a new waypoint, the original waypoint will lose its target or grid.

NOTE: The spacing of the rings on the waypoint target and the spacing of the grid lines on the trolling grid is the same as the length of the scale bar on the left edge of the display. Zooming in or out will decrease or increase the spacing, respectively.

Save, Edit or Delete a Route

Save the current route: While you are navigating, the current route can be saved. From the Navigation X-PressTMmenu, select Save Current Route and press the RIGHT Cursor key. Navigation will continue.

Display the Routes submenu: From any view, press the MENU key twice to display the Main Menu System, then use the RIGHT Cursor key to select the Navigation tab. Select Routes and press the RIGHT Cursor key to display the Routes submenu.

Create a route: From the Routes submenu, select Create and press the RIGHT Cursor key. A Route Edit screen will be displayed with an empty route. You can name the route, add waypoints to the route from the list of all waypoints, and order the waypoints in the route using the Cursor keys.

Edit a saved route: From the Routes submenu, select Edit and press the RIGHT Cursor key. A Route Edit screen will be displayed. Select the route you wish to edit and press the RIGHT Cursor key. Re- name the route or change, delete or re-order the waypoints used in the route.

Delete a saved route: From the Routes submenu, select Delete and press the RIGHT Cursor key. Select the route you wish to delete and press the RIGHT Cursor key. You will be asked to confirm your choice by pressing the RIGHT Cursor key again before the route is deleted.

Travel a saved route: From the Routes submenu, select Travel and press the RIGHT Cursor key. A list of saved routes will appear. Select the route you wish to travel and press the RIGHT Cursor key to make this route the current route and begin navigation. You may also travel the route in either forward or reverse order.

Route Info: From the Routes submenu, select Info and press the RIGHT Cursor key. A list of saved routes will appear. Select the route for which you want information, and press the RIGHT Cursor key. The list of waypoints in the route will be shown, with the distance and bearing from each waypoint to the next, as well as the distance and bearing from the current position to the first waypoint in the route.

Save or Clear a Current Track

Save the current track: From the Navigation X-PressTMmenu, select Save Current Track and press the RIGHT Cursor key. The track will remain on the display, but will change from black to gray. To remove the track completely from the display, see Edit, Delete or Hide Saved Tracks.

NOTE: When you save a track, a name is automatically assigned. The track name consists of a date/time stamp, but can be re-named later (see Edit a Saved Track).

Clear the current track: From the Navigation X-PressTMmenu, select Clear Current Track and press the RIGHT Cursor key. The track will be removed from the display and discarded.

27 28