Humminbird 77c manual Setup Menu Tab, Units Depth, Units Temp, Units Distance

Page 23

M77_Man_Eng_531350-1_B.qxd 1/3/2005 4:30 PM Page 44

Setup Menu Tab

From any view, press the MENU key twice to access the tabbed Main Menu System, then press the RIGHT cursor key until the Setup tab is selected.

NOTE:

 

Units - Temp

(International Models Only)

Units - Distance

(If Temp/Speed or GPS Receiver is Connected)

Units - Speed

(If Temp/Speed or GPS Receiver is Connected)

Language

(International Models Only)

Triplog Reset

(If Temp/Speed or GPS Receiver is Connected)

Select Readouts

(Advanced, Sonar View Only)

Depth Offset

(Advanced)

Temp Offset

(Advanced)

Speed Calibration

(Advanced, only if Temp/Speed is Connected)

NMEA Output

(Advanced)

Setup Menu

Units - Depth

Units - Depth selects the units of measure for all depth- related readouts.

To change the Units - Depth setting:

1.Highlight Units - Depth on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Depth setting. (Meters [International Models Only], Feet, Fathoms; Default is Meters for International models, and Feet for Domestic models)

Units - Temp

(International Only)

Units - Temp selects the units of measure for all temperature-related readouts.

International Models Only.

To change the Units - Temp setting:

1.Highlight Units - Temp on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Temp setting. (Celsius, Fahrenheit; Default = Celsius)

Units - Distance

(with Temp/Speed or GPS Receiver)

Units - Distance selects the units of measure for all distance-related readouts, and will appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once, or if a GPS Receiver is connected.

To change the Units - Distance setting:

1.Highlight Units - Distance on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Distance setting. (Domestic Models: Statute Miles, Nautical Miles; Default = Statute Miles; International Models: Meters/Kilometers, Meters/Nautical Miles, Feet/Statute Miles, Feet/Nautical Miles; Default = Meters/Kilometers)

39

40

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Matrix 77c Operations Manual Thank You Table of ContentsSonar X-Press Menu Alarms Menu TabSetup Menu Tab Views Menu Tab Accessories Menu Tab TroubleshootingDualBeam Plus Sonar How Sonar WorksWhat’s On the Display Temperature water surface temperatureSonar View ViewsSonar Zoom View Understanding Sonar HistoryReal Time Sonar RTS Window Big Digits View 200/83 kHz Split Sonar ViewBig Digits View 200/83 kHz Split Sonar ViewBottom Presentation Menu Key POWER/LIGHT KeyKey Functions View KeyExit Key Accessory BusPowering Up the Unit Advanced features such as WeatherSense, GPSChange to the screen Menu SystemPress the Menu key once to display Keys to reactivate the X-Press MenuSimulator Exit Normal operation by powering your Fishing System offStart-Up Options Menu Normal OperationSonar X-Press Menu System StatusPC Connect Upper Range To adjust the SensitivityTo adjust the Upper Range SensitivityBottom View Chart SpeedLower Range Sonar Zoom View Only To adjust the Zoom LevelZoom Level Sonar Menu TabHighlight Beam Select on the Sonar main menu Beam SelectFish ID+ To use Beam SelectDepth Lines Fish SensitivityKHz Sensitivity Max Depth Surface ClutterNoise Filter Water Type Alarms Menu TabTo change the Water Type setting Setting. Fresh, Salt, Default = FreshTemp Alarm Depth AlarmFish ID Alarm Low Battery AlarmUnits Distance Setup Menu TabUnits Depth Units TempUnits Speed User ModeTriplog Reset Restore DefaultsTo Select Readouts TemperatureSelect Readouts VoltageNmea Output Depth OffsetTemp Offset Speed CalibrationTo Change the View Status of Any View Accessories Menu TabViews Menu Tab Control head loses power at high speeds TroubleshootingDisplay Problems Problem Possible CauseIsolation Matrix Fishing System AccessoriesFinding the Cause of Noise Specifications Contact Humminbird
Top Page Image Contents