MAINTENANCE AND WARRANTY
CONTROL PANELS / MAINTENANCE/TROUBLESHOOTING
different species of fish have different sonar characteristics, so it is not always possible to distinguish fish size amongst varying species. Selecting FRESHWATER will adjust the algorithms toward freshwater species of fish, while selecting SALTWATER will adjust the algorithms towards saltwater species.
Note: The signal intensity is “normalized” for depth so that a small fish close to the boat will not appear as a large fish symbol. The digital depth of the designated fish is also shown to help locate the fish vertically. This is especially helpful in setting bait depths or for downrigger operation.
The FISH ID setting is retained in memory after the 3000 DEEP/3005 DEEP is turned off. The factory setting is Off.
Simulator
SIMULATOR allows the LEGEND 3000
SERIES to operate in simulated sonar mode. This is useful for
learning the features and functionality of the LEGEND 3000 SERIES when not on the water. Settings to Control Panels that are retained in normal operation will be retained in Simulator Mode if a transducer is connected. When operating with the Simulator on and without a transducer connected, the Legend 3000 Series does not remember any changes to settings.
The Simulator setting defaults to factory settings after the Legend 3000 Series is turned off.
Units
UNITS selects the units of measure for boat speed. Selecting KTS displays the speed in nautical miles per
hours; MPH displays the speed in miles per hour. UNITS selects the units of measure for boat speed and depth in one of two combinations supported by every
LEGEND 3000 SERIES:
•FEET/MPH displays depth in feet and speed in miles per hour.
•FEET/KTS DISPLAYS depth in feet and speed in nautical miles per hour.
UNITS also selects the units of measure for boat speed and depth in one of four additional combinations supported by the International Models only:
•METRES/KPH displays depth in metres/speed in kilometres per hour.
•METRES/KTS displays depth in metres/speed in nautical miles per hour.
•FATHOMS/KTS displays depth in fathoms/speed in
nautical miles per hour.
•FATHOMS/KPH displays depth in fathoms/speed in kilometres per hour.
The UNITS settings are retained in memory after the unit is turned off.
Language
LANGUAGE (International Models only) selects the language for text used in the CONTROL PANELS and for messages. See the
LEGEND 3005/3005 DEEP Specifications for included languages.
LANGUAGE setting is retained in memory after the LEGEND 3005 /3005 DEEP is turned off. The factory setting is ENGLISH.
MAINTENANCE
Your LEGEND 3000 SERIES is designed to provide years of
Cleaning
If the unit comes into contact with salt spray, simply wipe the affected surfaces with a cloth dampened in fresh water. Do not use a chemical glass cleaner on the lens, as chemicals in the solution may crack the lens.
When cleaning the LCD protective lens, use a chamois and
If your boat remains in the water for long periods of time, algae and other marine growth can reduce the effectiveness of the transducer. Periodically clean the face of the transducer with liquid detergent. Pivoting the transducer up in the bracket may allow better access for inspection or cleaning.
Wetting the Transducer
If your boat remains out of the water for a long period of time, it may take some time to wet the transducer when returned to the water. Small air bubbles can cling to the surface of the transducer and interfere with proper operation. These bubbles dissipate with time, or you can wipe the face of the transducer with your fingers after the transducer is in the water.
Heat Damage
Never leave the LEGEND 3000 SERIES in a closed car or
12