USING THE LEGEND 3000 SERIES
SONAR VIEWS / CONTROL PANELS
CONTROL PANELS
Control Panels provide access to important, but
SONAR VIEW, LIGHT, CONTRAST, RTS WINDOW, SURFACE CLUTTER, WHITE LINE, FILTER, DEPTH ALARM, TEMP ALARM, FISH ALARM, FISH SENSITIVITY, FISH ID,
SIMULATOR, UNITS, and, in International Models only, LANGUAGE. Control Panels allow you to set the mode of operation as well as additional features. Use the MODE to change the bottom tracking and depth range method of display, then use the other Control Panels to add features to your selected mode of operation.
Note: Only the International Models (3005 and 3005 Deep) contain a Language choice in the Control Panel, and only the International Models support
multiple units of measure, such as fathoms and metres.
Note: The Sonar View, Fish | Active | ||
Control Panel | |||
ID, Fish | Alarm, | Fish |
|
Sensitivity, | and | Filter |
|
choices only appear on the Deep Model Control Panels.
one time. When the selected option is at the bottom of the list, continue turning the knob to display other options.
3.Once the desired option is selected, turn the RANGE knob to adjust. Adjustments are made immediately and are shown by an indicator on the selected CONTROL PANEL.
4.Remove the CONTROL PANELS by pushing the CONTROL PANEL knob. Alternately, after a few seconds with no knob press/turn activity, the CONTROL PANELS are removed from the display automatically.
Mode
The first Control Panel to set is Mode. Three modes of operation control the
method used by the Legend 3000 Series to track the bottom, select depth ranges and graph the information on the LCD display. The Mode is selected by changing the Control Panel setting to Auto, Manual, or BTM Lock (Bottom Lock).
Automatic Mode
AUTOMATIC MODE follows the bottom contour, changing depth ranges as needed to keep the most recent sonar returns visible on the display. AUTOMATIC MODE keeps the
CONTROL PANELS are displayed by using the CONTROL PANEL knob and adjusted by using the RANGE knob. The active CONTROL PANEL consists of three parts:
the CONTROL PANEL NAME, SETTING INDICATOR, and SETTING READOUT.
The CONTROL PANEL NAME indicates the feature, the SETTING INDICATOR shows the current setting within the complete range of adjustment, and the SETTING READOUT shows the status when CONTROL PANEL is not selected.
To select a CONTROL PANEL feature for adjustment, follow these steps:
Setting
Readout
Setting
Indicator
acquired bottom visible at all times, showing sonar returns from the surface to the bottom and just beyond. This is useful when traveling across the water in areas where the depth constantly changes, requiring frequent range changes.
1.Press the CONTROL PANEL knob. A list of
options appears on the display. The option currently selected for adjustment is indicated by a white background color.
2.Rotate the CONTROL PANEL knob to select the desired option for adjustment. Clockwise rotation selects options higher in the list; counterclockwise rotation selects options lower in the list.
Note: Not all options in the list can be viewed on the display at
6