Bottom Lock Zoom Mode / Manual Mode

USING THE LEGEND 1000 SERIES

Bottom Lock Zoom Mode BTM LOCK (Bottom Lock) mode tracks the bottom similarly to Automatic mode; however, the display shows a full range view on right and a zoomed window on the left. The zoomed window provides added display resolution for separating sonar returns that are very close together, such as those caused by fish suspended close to the bottom.

Zoom Window	Zoom Preview
	Bars

Bottom Lock Zoom Mode

Manual Mode

MANUAL mode turns off automatic bottom tracking, leaving control of the

depth range to the user. Both the upper and lower depth ranges can be adjusted to show the bottom, or any other desired depth, in greater detail. When first switched to MANUAL mode, the LEGEND 1000 SERIES defaults to the current automatic depth range; however, after the manual depth ranges have been set, the LEGEND 1000 SERIES uses the new settings until it is powered off, when it defaults to factory settings.

MANUAL mode works best in areas of relatively flat bottom or if you are trolling slowly. It is also ideal for displaying a small area of the overall depth range in great detail if you are looking for fish at a specific

As the depth changes, the LEGEND 1000 SERIES automatically keeps the bottom visible in the zoomed window and the full range view. In the full range view, horizontal zoom preview bars define the area of bottom being enlarged. The default setting varies based on the depth range; however, this setting can be changed to show more area around the bottom, or to show the bottom in greater detail.

To change the area of the bottom being zoomed, follow these steps:

1.Make sure the LEGEND 1000 SERIES is operating in BTM LOCK (Bottom Lock) mode.

2.Push the RANGE knob. An adjustment indicator appears by the lower zoom preview bar, indicating this is the selected depth limit for adjustment.

Note: Pushing the RANGE knob toggles between the upper and lower zoom preview bar adjustment. If the lower zoom preview bar is to be adjusted, push the RANGE knob until it is selected.

3.Rotate the RANGE knob to adjust the zoom preview bar. Moving the zoom preview bars

closer together increases the display resolution in the zoomed window; moving them further

apart decreases display resolution, but allows more area around the bottom to be viewed.

The indicators disappear after several seconds with no adjustment. The LEGEND 1000 SERIES continues to follow the bottom using the new range. Any change made to the zoom preview bars is remembered until the LEGEND 1000 SERIES is powered off, when the unit defaults to factory settings.

depth.

To adjust the depth ranges manually, follow these steps:

1.Make sure the Legend 1000 Series is operating in Manual mode.

2.Push the Range knob. An adjustment indicator appears at the location of the Lower Depth Range, indicating that it is ready for adjustment.

Note: Pushing the Range knob toggles between the upper and lower depth range selection. If the Upper Depth Range is to be adjusted, push the Range knob until it is highlighted.

3.Rotate the RANGE knob to adjust the Depth Range. Clockwise rotation increases the depth; counterclockwise rotation decreases the depth. The display updates as the changes are made.

After several seconds without pressing or turning the knob, the DEPTH RANGE adjustment indicator will disappear from the screen automatically. The LEGEND 1000 SERIES does not make adjustments to keep the bottom information on-

Upper Depth Range

Adjustment Indicator

Lower Depth Range

Adjustment Indicator

Manual Mode