Humminbird 120 manual Step Five Assembling the Connector Holder

Page 15

INSTALLATION

CONTROL HEAD INSTALLATION

Step Five - Assembling the Connector Holder

1.Insert the cable connectors into the connector holder. The cable connectors are labeled, and there are corresponding labels on the connector holder (Figure 26). The slots for the connectors are keyed to prevent reverse installation, so do not force the connector into the holder.

2.Carefully pull the excess cable from beneath the - mounting surface so the connector holder aligns with the mounting holes on the front of the mounting bracket (Figure 27).

3.Snap the support plate to the rear of the connector holder (Figure 28).

4.Insert the connector holder into place and use the two #6-32 x ¾” (9mm) screws to fasten it to the mounting bracket (Figure 28).

5.Install the control head by sliding it onto the mounting bracket until it is fully seated. To remove the unit simply depress the latch on the rear of the unit and lift (Figure 29).

Your Humminbird is now ready for operation.

Image 15

Contents Page Table of Contents Parts Supplied Installation PreparationAccessories Installation OverviewDetermining How to Mount the Transducer Thru-Hull Mounting Alternate Transducers and Mounting MethodsPortable Mounting Trolling Motor MountingTransducer Exchange Beginning InstallationInstallation Transom InstallationStep One Determine Where to Mount the Transducer Step Three Assemble the Transducer Step Two Drill the Mounting HolesStep Four Mount the Transducer to the Transom Step Five Adjust the Running Position of the TransducerStep Six Route the Cable Inside the Hull Installation Step One Determine the Mounting LocationStep Two Test the Mounting Location Step Three Permanently Mount the Transducer Control Head Installation Step One Determine Where to MountStep Two Connect the Power Cable to the Boat Step Four Run the Cables Step Three Drill the Mounting HolesYour Humminbird is now ready for operation Step Five Assembling the Connector HolderTest the Installation Thank YOU Thank YOUHOW Sonar Works Using the Platinum IDUsing the Platinum ID Platinum ID Features Operating the Platinum ID Using the BUILT-IN SimulatorPlatinum ID Functions Using the Platinum ID Factory Setting MPH/SM Factory Setting Fish SymbolsSelecting Sensitivity Factory Setting +0 Enabling Fish Alarm Factory Setting OFF Factory Setting One level below maximum Using Bottom-Lock Factory Setting OFFFactory Setting OFF Factory Setting on AutomaticSpecifications Maintenance Maintenance and WarrantyTroubleshooting Nothing happens when I turn the unit onThere is no transducer detected There is no bottom reading visible on the display Screen begins to fadeout. Images are not as sharp as normal Unit comes on before I press POWER, and wont turn offMy unit loses power at high speeds Get gaps in the reading at high speedsHumminbird ONE Year Full Warranty Service Policy Customer Support

120 specifications

The Humminbird 120 is a pioneering fish finder that has gained recognition among anglers for its exceptional performance and user-friendly features. Designed with cutting-edge technology, this device offers a comprehensive suite of features that enhance fishing experiences on the water.

At the heart of the Humminbird 120 is its advanced sonar technology, which allows users to see fish and underwater structures with remarkable clarity. Equipped with dual-beam sonar, the device provides two different cone angles. The narrow beam offers high precision for locating specific targets, while the wide beam covers a larger area, making it easier to locate schools of fish.

One of the standout features of the Humminbird 120 is its easy-to-read display. The unit features a large, high-contrast screen with multiple color options, allowing users to customize their viewing experience. This clarity is essential, especially in bright sunlight or varying light conditions, ensuring that important information is visible at a glance.

In addition to fish identification, the Humminbird 120 packs a range of features designed to help anglers navigate their environment effectively. It includes advanced mapping capabilities, enabling users to create depth contours and view detailed underwater topography. This is particularly beneficial for identifying potential fishing hotspots and understanding the structure of the lake or riverbed.

The device also supports features such as temperature readings, which can be essential for understanding fish behavior and optimizing fishing strategies. The integrated GPS functionality further enhances usability by allowing users to mark waypoints, navigate through previously mapped areas, and avoid potential hazards while on the water.

Another practical aspect of the Humminbird 120 is its ease of installation and setup. Whether you have a small boat or a larger vessel, the device can be easily mounted and configured. The intuitive interface ensures quick access to functions, making it an excellent choice for both novice and experienced anglers alike.

Durability is also key in the design of the Humminbird 120. Built to withstand the rigors of regular use, the device is water-resistant and designed for various environmental conditions.

In summary, the Humminbird 120 combines advanced sonar technology, a clear display, effective mapping tools, and robust durability, making it a valuable asset for any angler looking to enhance their fishing experience. Whether you are searching for fish or exploring underwater terrain, the Humminbird 120 delivers reliability and performance on the water.