Honeywell TE923W Using Different Weather Modes, Accessing Pressure and Weather Forecast Mode

Page 23

LED Backlight Options

The main unit backlight can be turned on, off or automatically toggled depending on the environment light conditions. Use the light sensor switch at the back of the main unit to select a desired backlight setting.

For the automatic backlight control, the sensitivity of the light sensor can be adjusted to high or low using the switch, located on the back panel.

Note: For an automatic control function the main unit must be plugged into the wall power outlet via the AC/DC adaptor provided.

Connecting the Weather Station to a PC

Data collected by the weather station can be displayed on PC by connecting the main unit to the computer via USB cable.

•Install the software provided with the weather station according to the instructions in the software manual.

•Connect the main unit to the computer using the USB cable provided.

Using Different Weather Modes

Pressure and Weather Forecast Mode

It indicates the current barometric pressure, the sea level pressure, the weather forecast and the moon phase.

A number of historical statistics can also be viewed, including the sea-level pressure for the past 24 hours, moon phase for the past and following 39 days, as well as a pressure/ temperature/ humidity history bar-chart.

Pressure can be displayed inHg, hPa/mBar or mmHg, and altitude can be displayed in meters or feet.

Accessing Pressure and Weather Forecast Mode

From the main unit: Press UP or DOWN until the weather forecast icon on the upper left of the display starts flashing.

From the remote control: Press.

Setting Pressure Parameters during initial setup

IMPORTANT: During the main unit initial setup, after main unit powered up, all of the functions in Pressure and Weather Forecast mode will be locked for a short time, until the pressure settings are configured. The locked display will show the pressure icon and abbreviation “inHg” flashing.

To unlock the mode, set the pressure and altitude units and program the altitude.

23

Image 23

Contents TE923W Honeywell Professional Weather Station With Remote ControlTable of Contents Introduction Standard Package Contents PC connection cable InstallationMounting hardware Before you begin UV Ultraviolet Sensor FeaturesGround AssemblyPlacement tips MountingThermo-Hygrometer Sensor FeaturesPlacement tips Rain Gauge Mounting Anemometer wind sensor Aligning Battery CoverWeather PowerMain Unit TimeOperation SET Main unit and handheld remote control adequate buttonsMain unit only Handheld remote control onlyTemperature Humidity Mode Wind ModePressure and Weather Forecast Window Displays Navigating through the modesSunrise/Sunset Window Clock and Alarms Window DisplaysUV Window Displays Rain Window Displays Temperature and Humidity Window DisplaysOptional Customizing your Weather StationWind Window Displays It is required to programSetting Pressure Parameters during initial setup Using Different Weather ModesAccessing Pressure and Weather Forecast Mode Viewing the Sea Level Pressure History Sea Level Pressure SettingSetting the Pressure and Altitude Unit Viewing the Pressure and Altitude InformationWeather Forecast Display Understanding Viewing the Pressure, Temperature and Humidity Bar ChartsViewing the Moon Phase History and Weather Forecast Viewing UV Statistics Accessing UV ModeResetting the UV Statistics Memory Setting Units for UV Display MED/h or UVISetting the time, date and language Clock and Alarm Mode Manual SettingsAccessing Clock and Alarm Mode Different Clock and Calendar Displays Enabling or Disabling the Time AlarmsProgramming Time Alarms Atomic Time Reception To disable alarmsDisabling or Enabling Snooze function Icon Atomic Time Reception Strength Viewing the Location Data Accessing Sunrise/Sunset ModeProgramming the Location Data Set Degree of LatitudeSunset status Accessing Temperature and Humidity ModeUnderstanding of the Sunrise/Sunset Display Display Sunrise statusActivating/Deactivating the Temperature Alerts Viewing Temperature and Humidity for each ChannelRecalling of Temperature and Dew Point Displays Set the Temperature in Celsius or FahrenheitAll Remote Sensor Signals Search Activation Disabling Temperature AlarmsViewing the Max/Min Channel Temperature and Humidity Resetting the Remote Temperature and Humidity MemoryViewing Rain Statistics Resetting the Rainfall Statistics MemorySetting Units for the Rain Display in inches or mm Setting up the Daily Rainfall AlertResetting the Wind Statistics Memory Accessing Wind ModeConfiguring Wind Display Setting Units for the Wind Speed in km/h, mph, m/s or knotsMaintenance Weather forecast is inaccurate Precautions Appendix City Codes City Code Time Barometric Pressure SpecificationsDST Daylight Savings Time definitions Radio Frequency 433 MHzHumidity Outdoor Temperature IndoorTemperature remote Humidity IndoorRainfall Battery life alkalineWeight without batteries DimensionsFCC Statement Standard Warranty Information

Related manuals

Manual 49 pages 57.1 Kb

TE923W specifications

The Honeywell TE923W is a sophisticated weather station that provides users with real-time data and insights into weather conditions. This versatile device combines advanced technology with user-friendly features, making it an essential tool for anyone interested in tracking and understanding weather patterns.

One of the main features of the TE923W is its ability to deliver accurate weather forecasts. The station uses a combination of sensors to monitor various environmental factors, including temperature, humidity, wind speed, and rainfall. This information is processed to provide reliable forecasts for up to 12 hours ahead, allowing users to plan their activities accordingly.

The TE923W boasts a large, easy-to-read LCD display that shows a wealth of data at a glance. Users can view current indoor and outdoor temperatures, humidity levels, and atmospheric pressure. Additionally, the display features weather icons that represent the current weather conditions, making it simple for users to interpret the data visually.

Another standout characteristic of the Honeywell TE923W is its wireless connectivity. The device includes a wireless outdoor sensor that can transmit data from up to 330 feet away. This means users can place the sensor outside, where it can accurately measure outdoor conditions without being tethered by wires. The wireless connection also allows users to position their weather station in an ideal location for optimal readings.

In terms of power, the TE923W is designed for convenience. It can be powered using either batteries or an AC adapter, giving users flexibility in how they set up the device. This feature proves especially useful for users who want to place the station in hard-to-reach areas where power outlets may be limited.

The Honeywell TE923W is user-friendly, featuring a simple setup process and intuitive controls. Its ability to store historical data allows users to track weather trends over time, offering valuable insights into local climate patterns.

Overall, the Honeywell TE923W is a comprehensive weather station that marries functionality with ease of use. Whether you are a weather enthusiast, a gardener, or simply someone who likes to stay informed about the conditions outside, the TE923W stands out as a reliable and informative tool for monitoring the weather. Its combination of advanced features, wireless technology, and clear display make it a valuable addition to any home or office.