Honeywell TE923W Accessing Wind Mode, Configuring Wind Display, Viewing Wind Statistics

Page 36

The wind speed and gust alert functions can be programmed to alert you if the wind speed or gust exceeds a pre-configured limit. The wind speed can be displayed in km/h, mph, m/s or knots.

Note: The wind speed alert has a 5 mph deviation and the wind gust speed alert has a 7 mph deviation. It is set to prevent the alerts from sounding all the time due to small fluctuations close to the alert value. This means that after the wind speed reaches the alert value, it will have to fall below the alert value plus deviation to activate the alert.

Accessing Wind Mode

From the main unit: Press UP or DOWN until the WIND icon on the display starts

flashing. From the remote control: Press.

Configuring Wind Display

In the Wind Mode press the SET button to recall either a wind chill temperature with wind direction in bearings, a wind chill temperature with a wind direction in compass points, a temperature at anemometer and wind direction in compass points or a temperature at anemometer and wind direction in bearings.

Setting Units for the Wind Speed in km/h, mph, m/s or knots

In the Wind Mode, press and hold SET to set the wind speed units in km/h, mph, m/s or knots.

Viewing Wind Statistics

In the Wind Mode, press the MEMORY button to recall a current wind speed, a daily maximum wind speed with “DAILY MAX” displayed, a gust speed with a “GUST” displayed and a daily maximum gust speed with a “GUST DAILY MAX” displayed.

Resetting the Wind Statistics Memory

In the Wind Mode, press and hold MEMORY to reset all wind statistics.

Enabling or Disabling the Wind Alerts

In the Wind Mode press the ALARM/CHART to recall a current wind speed, a wind speed alert with the “ALARM HI” displayed or gust alert with the “GUST ALARM HI” displayed.

If the alert is disabled, “OFF” will be displayed; otherwise the alert value is shown. When a wind alert is displayed, press the UP or DOWN to activate or deactivate it.

Wind Alerts programming

•In the Wind Mode, press ALARM/CHART to select the desired alarm.

•Press and hold ALARM/CHART button until alert and corresponding icon will

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Honeywell Professional Weather Station With Remote Control TE923WTable of Contents Introduction Standard Package Contents Installation Mounting hardwarePC connection cable Before you begin Features UV Ultraviolet SensorAssembly Placement tipsMounting GroundFeatures Thermo-Hygrometer SensorPlacement tips Rain Gauge Mounting Anemometer wind sensor Battery Cover AligningPower Main UnitTime WeatherOperation Main unit and handheld remote control adequate buttons SETHandheld remote control only TemperatureHumidity Mode Wind Mode Main unit onlyNavigating through the modes Pressure and Weather Forecast Window DisplaysClock and Alarms Window Displays UV Window DisplaysSunrise/Sunset Window Temperature and Humidity Window Displays Rain Window DisplaysCustomizing your Weather Station Wind Window DisplaysIt is required to program OptionalUsing Different Weather Modes Accessing Pressure and Weather Forecast ModeSetting Pressure Parameters during initial setup Sea Level Pressure Setting Setting the Pressure and Altitude UnitViewing the Pressure and Altitude Information Viewing the Sea Level Pressure HistoryViewing the Pressure, Temperature and Humidity Bar Charts Viewing the Moon Phase History and Weather ForecastWeather Forecast Display Understanding Accessing UV Mode Resetting the UV Statistics MemorySetting Units for UV Display MED/h or UVI Viewing UV StatisticsClock and Alarm Mode Manual Settings Accessing Clock and Alarm ModeSetting the time, date and language Enabling or Disabling the Time Alarms Programming Time AlarmsDifferent Clock and Calendar Displays To disable alarms Disabling or Enabling Snooze functionAtomic Time Reception Icon Atomic Time Reception Strength Accessing Sunrise/Sunset Mode Programming the Location DataSet Degree of Latitude Viewing the Location DataAccessing Temperature and Humidity Mode Understanding of the Sunrise/Sunset DisplayDisplay Sunrise status Sunset statusViewing Temperature and Humidity for each Channel Recalling of Temperature and Dew Point DisplaysSet the Temperature in Celsius or Fahrenheit Activating/Deactivating the Temperature AlertsDisabling Temperature Alarms Viewing the Max/Min Channel Temperature and HumidityResetting the Remote Temperature and Humidity Memory All Remote Sensor Signals Search ActivationResetting the Rainfall Statistics Memory Setting Units for the Rain Display in inches or mmSetting up the Daily Rainfall Alert Viewing Rain StatisticsAccessing Wind Mode Configuring Wind DisplaySetting Units for the Wind Speed in km/h, mph, m/s or knots Resetting the Wind Statistics MemoryMaintenance Weather forecast is inaccurate Precautions Appendix City Codes City Code Time Specifications DST Daylight Savings Time definitionsRadio Frequency 433 MHz Barometric PressureTemperature Indoor Temperature remoteHumidity Indoor Humidity OutdoorBattery life alkaline Weight without batteriesDimensions RainfallFCC Statement Standard Warranty Information
Related manuals
Manual 49 pages 57.1 Kb

TE923W specifications

The Honeywell TE923W is a sophisticated weather station that provides users with real-time data and insights into weather conditions. This versatile device combines advanced technology with user-friendly features, making it an essential tool for anyone interested in tracking and understanding weather patterns.

One of the main features of the TE923W is its ability to deliver accurate weather forecasts. The station uses a combination of sensors to monitor various environmental factors, including temperature, humidity, wind speed, and rainfall. This information is processed to provide reliable forecasts for up to 12 hours ahead, allowing users to plan their activities accordingly.

The TE923W boasts a large, easy-to-read LCD display that shows a wealth of data at a glance. Users can view current indoor and outdoor temperatures, humidity levels, and atmospheric pressure. Additionally, the display features weather icons that represent the current weather conditions, making it simple for users to interpret the data visually.

Another standout characteristic of the Honeywell TE923W is its wireless connectivity. The device includes a wireless outdoor sensor that can transmit data from up to 330 feet away. This means users can place the sensor outside, where it can accurately measure outdoor conditions without being tethered by wires. The wireless connection also allows users to position their weather station in an ideal location for optimal readings.

In terms of power, the TE923W is designed for convenience. It can be powered using either batteries or an AC adapter, giving users flexibility in how they set up the device. This feature proves especially useful for users who want to place the station in hard-to-reach areas where power outlets may be limited.

The Honeywell TE923W is user-friendly, featuring a simple setup process and intuitive controls. Its ability to store historical data allows users to track weather trends over time, offering valuable insights into local climate patterns.

Overall, the Honeywell TE923W is a comprehensive weather station that marries functionality with ease of use. Whether you are a weather enthusiast, a gardener, or simply someone who likes to stay informed about the conditions outside, the TE923W stands out as a reliable and informative tool for monitoring the weather. Its combination of advanced features, wireless technology, and clear display make it a valuable addition to any home or office.
Top Page Image Contents