SPECIFICATIONS
MAIN UNIT
TYPE | DESCRIPTION |
|
|
L x W x H | 194 x 136 x 49 mm |
| (7.71 x 5.35 x 1.93 in) |
|
|
Weight | 670g (23.63 oz) without battery |
|
|
Power | 6V AC adaptor |
| 3 x |
|
|
REMOTE RF CLOCK THERMO SENSOR
TYPE | DESCRIPTION |
|
|
L x W x H | 64 x 25 x 98 mm |
| (2.52 x 0.98 x 3.86 in) |
|
|
Weight | 80 g (2.8 oz) without battery |
|
|
Temperature range | |
|
|
Resolution | 0.1°C (0.2°F) |
|
|
Signal frequency | 433 MHz |
|
|
Transmission range | 30 m (98 ft) unobstructed |
|
|
No. of channels | 5 |
|
|
Power | 1 x |
|
|
7
PRECAUTIONS
•Where there is excess electrostatic discharge, the unit may reset itself to default settings. User will be required to set the unit again.
•Do not subject the unit to excessive force, shock, dust, temperature or humidity.
•Do not cover the ventilation holes with any items such as newspapers, curtains etc.
•Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft,
•Do not clean the unit with abrasive or corrosive materials.
•Do not tamper with the unit’s internal components. This invalidates the warranty.
•Only use fresh batteries. Do not mix new and old batteries.
•Images shown in this manual may differ from the actual display.
•When disposing of this product, ensure it is collected separately for special treatment and not as normal household waste.
•Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible. Consult the furniture manufacturer’s care instructions for information.
•The contents of this manual may not be reproduced without the permission of the manufacturer.
•Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.
EN
BAR610P_M_EN_R3.indd 7
12/9/08 17:55:49