When you press BOOST and the transmit power is low
(LO - 1W), the radio transmits at maximum high power (HI - NOTE 2.5W) except for channels 75 and 76.
5.When you have finished speaking, release PTT or BOOST to listen for a response. TX then disappears.
One-touch Channel 16/9
While monitor- | Press 16/9 |
ing CH 20, press | again to |
16/9 to monitor | monitor CH 9. |
Press 16/9 again to monitor the original channel
CH 16. | LO | LO |
|
|
(CH 20).
LO
Triple Watch
Triple Watch mode monitors channels 16 and 9 for a signal while you listen to the
1.Press and hold TRI to activate Triple Watch.
2.Press and hold TRI again to exit Triple Watch.
| While in Triple Watch mode, you can change the currently- |
NOTE | selected channel using CH or CH . |
|
Scanning
The radio can scan the channels programmed into memory (see page 16). To initiate scanning:
1. Select channel 17.
2. Press SCAN and scanning starts. SCAN
displays during scanning. | LO | SCANMEM |
The radio will scan memory channels in |
| |
|
| |
ascending order. |
|
|
If Triple Watch is turned on during the scan, the radio will scan the memory channels in ascending order. Check channel 9 and channel 16 every 2 seconds, and then resume scanning the memory channels.
Uniden |