Problem | Things to Try | |
| • Make sure you are not in scan mode. | |
| • Make sure you are not trying to | |
| transmit on a | |
| or transmit at the wrong power level | |
The radio won’t | for this channel (see the channel lists | |
starting on page | ||
transmit. | ||
• Check the battery power level; if it’s | ||
| ||
| low, charge the battery before trying to | |
| transmit. | |
| • Make sure the duration of each | |
| transmission is less than 3 minutes. | |
I can’t hear anything | Adjust the squelch level; it is probably | |
from the speaker. | too high. | |
Noise comes out of the | Adjust the squelch level; it is probably | |
speaker all the time | too low. | |
I can transmit, but no | Check your UIC channel settings: does | |
the area you are in use different channel | ||
one can hear me. | ||
assignments? | ||
| ||
Where can I find my | The serial number is on a plate inside | |
radio’s serial number? | the battery compartment. |
Specifications
General
Channels | All US, International, and Canada marine | |
channels | ||
| ||
Frequency Control | PLL | |
Frequency Tolerance | Transmit: 1.5 PPM (at 25°C) | |
| Receive: 1.5 PPM (at 25°C) | |
Operating Temperature | ||
Antenna | Flexible Whip | |
Microphone | ||
Display | Liquid Crystal Display | |
Speaker | 16 Ω 0.2 W |
Uniden |