Conversion from Natural GAS to L.P | White Rodgers 36C specification

INSTALLATION (cont'd)

	Conversion		Outlet Pressure
	from	Pilot Gas	Regulator
Model	Natural/LP	Adjustment	Adjustment
36C84-912	See Conversion	See Fig. 10	See Fig. 10
	from Natural Gas
	to L.P.
36C84-913	See Conversion	See Fig. 10	See Fig. 10
	from Natural Gas
	to L.P.
36C84-916	Not Convertable	See Fig. 10	See Fig. 10
36C84-921	See Conversion	See Fig. 10	See Fig. 10
	from Natural Gas
	to L.P.
36C84-923	Not Convertable	See Fig. 10	See Fig. 10
36C84-926	Not Convertable	See Fig. 10	See Fig. 10
36C84-936	Not Convertable	See Fig. 10	See Fig. 10
36C87-944	Not Convertable	See Fig. 10	See Fig. 10
36C94-906	See Conversion	See Fig. 10	See Fig. 10
	from Natural Gas
	to L.P.
36C94-907	See Conversion	See Fig. 10	See Fig. 10
	from Natural Gas
	to L.P.

CONVERSION FROM

NATURAL GAS TO L.P.

1.Remove regulator cover screw.

2.Turn regulator adjustment screw counterclockwise and remove from valve.

3.Remove regulator spring from valve.

4.Insert proper spring Nat./L.P. into the valve.

5.Replace the regulator adjustment screw and adjust to appliance manufacturers specifications.

6.Replace regulator cover screw.

Regulator Adjusting

Cover Screw

Pilot Adjust

Cover Screw

Figure 10

OUTLET PRESSURE ADJUSTMENTS

This control is shipped from the factory with the regulator set to the outlet pressure shown in the table on page 1. Consult the appliance rating plate to be sure that the setting matches the appliance manufacturer's specifications. If required, the regulator can be adjusted for outlet pressures normally ranging from 2.5 to 5" W.C. (natural gas) or 7.5 to 12" W.C. (L.P. gas). Do not force the adjusting screw beyond the

limits that it can easily be adjusted.

1.Attach a manometer to the outlet pressure tap of the valve.

2.Energize system to ignite main burner.

3.Remove "Reg. Adj." cover screw.

4.To DECREASE outlet pressure, turn the adjusting screw (beneath the cover screw) counterclockwise. To INCREASE outlet pressure, turn the adjusting screw clockwise.

5.Replace the cover screw. Cycle the valve two or three times to verify regulator setting.

PILOT GAS ADJUSTMENT

This control was factory preset and will not normally require additional adjustment of pilot flame.

If the pilot flame is low and does not engulf the bulb of the sensor, the system will not energize the main valve.

If pilot gas pressure is too high, gas will sputter past the ignition electrode, and may not ignite. High pilot gas pressure may also cause the flame to lift off the burner, causing the flame sensor bulb to sense "low" heat.

To adjust the pilot flame, remove the cover screw and gasket (see figure 10). To REDUCE pilot flame, turn the pilot adjust screw (beneath the cover screw) clockwise. To INCREASE pilot flame, turn the pilot adjust screw counterclockwise. Replace gasket and tighten cover screw.

36C specifications

The White Rodgers 36C is a versatile and reliable thermostat designed to enhance temperature control within residential and commercial environments. Part of the White Rodgers brand, known for its innovation in heating, ventilation, and air conditioning (HVAC) technologies, the 36C model stands out due to its user-friendly features and advanced functionalities.

One of the primary features of the White Rodgers 36C thermostat is its digital display, which provides clear and concise readings of indoor temperatures. This LCD display is easy to read, allowing users to adjust settings without hassle, even in low-light conditions. The thermostat is equipped with a user-friendly interface that simplifies programming, enabling users to set schedules according to their specific heating and cooling needs.

The 36C model utilizes microprocessor technology, which enhances its accuracy and reliability in temperature regulation. This technology ensures that the thermostat maintains the desired temperature levels with minimal fluctuations, contributing to overall energy efficiency. By intelligently controlling HVAC systems, the 36C helps reduce energy consumption, leading to lower utility bills and a smaller carbon footprint.

Another key characteristic of the White Rodgers 36C is its compatibility with various heating and cooling systems, including gas, oil, and electric units. This adaptability allows homeowners and businesses to integrate the thermostat seamlessly into their existing HVAC setup. Additionally, the thermostat supports multi-stage heating and cooling applications, making it a suitable choice for those with more complex temperature control needs.

For enhanced comfort and convenience, the White Rodgers 36C comes with programmable features. Users can easily program specific time frames for heating and cooling, ensuring that the environment is comfortable upon arrival while maximizing energy savings during periods of inactivity. This programmable functionality is particularly beneficial for families and individuals with busy schedules.

Furthermore, the White Rodgers 36C promotes ease of installation and maintenance. Its compact design and straightforward setup process allow users to replace older models without the need for professional assistance. The thermostat's durability and long-lasting performance underline its reliability as an essential component of any HVAC system.

In summary, the White Rodgers 36C thermostat combines advanced technology, user-friendly features, and compatibility with various heating and cooling systems. Its digital interface and programmable capabilities provide enhanced control and convenience, making it a popular choice for maintaining optimal indoor climate conditions. With a focus on energy efficiency and comfort, the White Rodgers 36C stands out as a reliable solution for effective HVAC management.