Feature Operations (Pattern Steering)
How to Select Feature Operations
1.Autopilot must be in Heading Hold or Standby Mode before selection process can start. (AUTO LED solid on or STBY LED solid on. No other LED’s on.)
2.Press and hold the Setup Button. Two LED’s next to number 1 through 6 will illuminate, indicating which special functions are programmed to operate.
3.Make selection of the Special Function you want to use by pressing and releasing the Special Function buttons until the appropriate LED’s are lit. (See Table below for Special Function Indicators.)
4.Release the Setup Button
5.To make the selected Special Functions into startup defaults (Save The Setting): Press and
release the setup button, (LED will light) next press and hold the Select Load Button, then press and release the DeckMount Button quickly, last release the Select Load Button. (You can change this default by repeating this process.)
Number 7, 8 and 9 are GPS features and only work when coupled with GPS
(See your owner’s manual)
Man Over Board Idle/Resume
Step Turns to Port Circle Turns to Port Remote Turn to Port
Turn back light on or off
Press and hold to change feature options.
GPS
Reverse
Step Turns to Starboard
Circle Turns to Starboard
Remote Turn to Starboard
LED’s Bright or
Dim
Special Function Indicator LED Numbers
1 | MOB | 4 | Steps | 7 | Orbit Wpt. |
|
|
|
|
|
|
2 | Idle/Resume | 5 | Circles | 8 | Three Leaf Clover |
|
|
|
|
|
|
3 | 6 | Remote Steer | 9 | Search | |
|
|
|
|
|
|