Taylor 1383 Additional Features, Tips, Selection, Backlight, Low Battery Warning

Additional Features

°C/°F Selection

Press the “C/F” button on the back of the base unit to switch between Fahrenheit and Celsius temperatures.

Backlight

Press the Backlight button on the top of the base unit. The LCD screen will light up for approximately 5 seconds.

Low Battery Warning

Base unit – replace both batteries when the “ ” icon appears on the right side of the screen.

Remote sensor – replace both batteries when the “” icon appears on the left side of the screen.

Tips

Setup:

Place the base unit as close as possible to the remote sensor during setup. This will ensure the best reception of signals as you set up your wireless forecaster.

Location:

Position the base unit and remote sensor within the effective trans- mission range of 200 feet (60 meters).

Place the base unit indoors in a well-ventilated location away from direct sunlight.

Place the remote sensor in a dry, shaded area. Direct sunlight will heat the casing and inflate temperatures readings.

7