Selecting the Display Method

The NRX200 remote control can be configured to display NMEA2000 network data, the following options are available:

•Wind Direction

•Wind Speed

•Depth

•Speed over Ground

•Speed through Water

•Heading

•Position

•Water Temperature

•Atmospheric Pressure

•ETA

The remote control can be configured to automatically cycle through the selected NMEA2000 data. Press the ‘Menu’ button and select ‘SETTINGS’ > ‘NMEA Monitor’ > ‘CYCLE SCREENS’. Select from the following options. Press the ‘Menu’ button to exit.

•Off

•2 seconds

•5 seconds

•10 seconds

SELECTING UNITS OF MEASURE

Press the ‘Menu’ button and select ‘SETTINGS’ > ‘NMEA Monitor’ > ‘SET UNITS’. Select from the following options. Press the ‘Menu’ button to exit.

Distance: KM, Miles, Nautical Miles, Metres, Feet

Speed: KM/H, MPH, KTS, M/S

Depth: Metres, Feet, Fathoms Temperature; °C, °F

MS-NRX200 Manual.indd 7

(b) New NMEA2000 Network

Fusion provides a NMEA2000 Starter Kit MS-N2KSTART for creating a new NMEA2000 network on your vessel.

MS-N2KSTART - NMEA2000 Starter Pack

3 x NMEA2000 T-Connectors

1 x Terminator Micro C - Male

1 x Terminator Micro C - Female

1 x NMEA2000 Power Cable

2 x Drop Cable, FUSION to NMEA2000 Micro-C 1 x 6M Backbone Cable, Micro C Male - Female

Note: The supplied Terminator must be fitted to the ends of the network as shown. Failure to do so will effect operation.

Optional Accessory:	MS-N2KEXT6 - 6m extension lead
	MS-N2KEXT20 - 20m extension lead

12/12/2011 3:29:10 p.m.