2. Rear Panel
1.POWER/DDC: Connect the DDC output of the transmitter to the DDC input of the receiver unit using CAT5/6/7 cables.
2.VIDEO 2: Connect the VIDEO 2 output of the transmitter to the VIDEO 2 input of the receiver unit using CAT5/6/7 cables.
3.VIDEO 1: Connect the VIDEO 1 output of the transmitter to the VIDEO 1 input of the receiver unit using CAT5/6/7 cables.
PIN ASSIGNMENT
1. Dual Link DVI-D Pin Definition
Digital-Only Connector Pin Assignments
Pin | Signal Assignment | Pin | Signal Assignment | Pin | Signal Assignment |
1 | T.M.D.S Data2- | 9 | T.M.D.S Data1- | 17 | T.M.D.S Data0- |
2 | T.M.D.S Data2+ | 10 | T.M.D.S Data1+ | 18 | T.M.D.S Data0+ |
3 | T.M.D.S. Data2/4 Shield | 11 | T.M.D.S. Data1/3 Shield | 19 | T.M.D.S. Data0/5 Shield |
4 | TMDS Data 4- | 12 | TMDS Data 3- | 20 | TMDS Data 5- |
5 | TMDS Data 4+ | 13 | TMDS Data 3+ | 21 | TMDS Data 5+ |
6 | DDC Clock | 14 | +5V Power | 22 | T.M.D.S. Clock Shield |
7 | DDC Data | 15 | Ground (for +5) | 23 | T.M.D.S. Clock+ |
8 | No Connect | 16 | Hot Plug Detect | 24 | T.M.D.S. Clock- |
Toll free: | 4 | www.atlona.com |
Local: |