OPERATION
ESP FUNCTION
The unit can be shockproof about ten seconds.
REMOTE SENSOR
Point the remote control handset to the remote sensor (3). Press the function keys on the handset to control the system.
RESET FUNCTION
Reset button (25) must be activated with either a ballpoint pen or thin metal object.
The reset button is to be activated for the following reasons:
-Initial installation of the unit when all wiring is completed.
-All the function buttons do not operate.
-Error symbol on the display.
POWER-DOWN MEMORY FUNCTION
The unit has the
RADIO OPERATION
SWITCHING TO RADIO MODE
Press MOD button (9) shortly to select radio mode, the radio mode appears in the display together with the memory band and frequency.
SELECTING THE FREQUENCY BAND
At radio mode, press BND/LOU/ENT button (5) shortly to select the desired band.
The reception band will change in the following order:
→FM1 → FM2 → FM3 → AM (MW)
SELECTING STATION
Press the 
button (22) or 
button
(19)shortly to activate automatic seek function. Press for several seconds until
7
“MANUAL” appears on the display, the manual tuning mode is selected. If both buttons have not been pressed for several seconds, it will return to seek tuning mode and “AUTO” appears on the display.
AUTOMATIC MEMORY STORING & PROGRAM SCANNING
-Automatic memory storing
Press AS/PS button (6) for several seconds, the radio searches from the current frequency and checks the signal strength until one cycle search is finished. And then 6 strongest stations are stored into the corresponding preset number button.
-Program scanning
Press AS/PS button (6) shortly to scan preset station. When the field strength level is more than the threshold level of stop level, the radio is holding at that preset number for several seconds with release mute, then searches again.
STATION STORING
Press any one of the preset buttons (14) (1 to 6) to select a station, which had been stored in the memory. Press this button for several seconds to store the current station into the number button.
RBDS OPERATION
¾In FM mode, press TA button (11), the unit will search Traffic Announcement automatically. When received a Traffic Announcement station, the unit will change to the Traffic Announcement station automatically. Press TA button (11) again will exit TA mode.
¾USE PTY BUTTON (8)
Press PTY button (8) to enter PTY SELECT menu. In the menu, use the VOL+/- buttons (23&20) or use the preset buttons (14) (1 to 6) to select the items.