Cobra Electronics MR F75-D Digital Select Calling DSC Setup, DSC Set-Up, User Mmsi Number

Page 23

Digital Select Calling (DSC)

Setup

Operating Your Radio

DSC Set-Up

•

 

Digital selective calling — DSC — employs digital RF signals which tend to carry further and be less susceptible to distortion from noise and atmospheric conditions than analog ones. The result is greater range and more reliable message delivery per watt of output power.

But, that is not the only advantage of DSC equipped radios. Those radios are set up to interface with GPS and to automate many of the operations involved in sending and receiving messages. That results in more compact and accurate messages and less congestion of the airwaves.

The price of these benefits to the user is the time it takes to do the required set-up to make the DSC features work. A little time spent when your radio is new will pay dividends over its life.

These procedures use the Settings menu. Refer to page 38 for information on entering and exiting the Settings menu.

User MMSI Number

The nine (9) digit MMSI number, similar to a telephone number, is a unique identifier for a vessel. DSC incorporates this number into every message that is Sent (Tx) or Received (Rx). Enter the MMSI number as soon as you receive your MMSI number from the issuing agency listed on page 9.

NOTE

The radio does not operate in the DSC mode until an official MMSI number is entered. An error tone will sound when attempting to operate in the DSC mode without an MMSI number.

NOTE

An MMSI number can only be entered one time. To create a new MMSI number, the unit must be reset by the dealer.

Operating Your Radio

User MMSI

User MMSI ID Entry

Error Message

Call/Set Button

Digital Select Calling (DSC) Setup

To Enter Your MMSI Number:

1.Enter the Settings menu and scroll to USERMMSI with the Up/Down buttons.

2.Press the Call/Set button and the blinking cursor will appear at the first digit under USER MMSI ID ENTRY.

3.Use the Up/Down buttons to scroll through the number list to that digit of your number.

4.Press the Call/Set button to select the digit and the blinking cursor will move to the next digit of the number.

5.Repeat steps 3 and 4 until all nine (9) digits of your MMSI number are entered.

NOTE

Press the High/Low Power button to backspace and erase the last selected number.

6.Check that you have entered the number correctly. The unit will ask you to re-enter your number to confirm.

7.Press and hold the Call/Set button to return to the Settings menu.

If You Incorrectly Enter Your MMSI Number

You can repeat steps 1 through 7 to correct it. HOWEVER, YOU CAN DO THIS ONLY ONCE! A third attempt to enter an MMSI number will result in an error message as shown.

Pressing the Call/Set button from the error message will return the radio to the Settings menu.

Once the error message appears, the radio will still operate in all non-DSC modes. But you will have to return the radio to Cobra® Electronics (see product service on page 73 for details) for reset before you can enter your MMSI number and use the radio in DSC mode.

Because the MMSI number is so important to DSC operation, this limitation is imposed on all DSC capable radios to prevent constant changes and the potential introduction of errors in the process. If, for any reason, it is necessary to change the MMSI number in the radio more than once, you can return it to Cobra® Electronics for reset.

 

 

 

 

40 English

Nothing Comes Close to a Cobra® 41

Page 22 Page 24
Image 23
Page 22 Page 24
Contents For Assistance Outside The U.S.A Our Thanks To You Customer AssistanceClass-D Fixed Mount VHF Radio Customer Assistance For Assistance In The U.S.AMicrophone/Speaker With Auxiliary Controls Transceiver Controls Indicators And ConnectionsMicrophone/Speaker Product Features Product FeaturesTable Of Contents Always use only Cobra authorized accessories Important Safety InformationImportant Safety Information Safety Training InformationFCC Information Recommendations For Marine CommunicationVoice Calling VHF Marine Radio ProceduresDigital Selective Calling DSC Maritime Mobile Service Identity MmsiMaritime Mobile Service Identity Mmsi Digital Selective Calling DSCRadiotelephone Calls Emergency Messages Distress ProcedureRadiotelephone Calls Say Marine Distress ProcedureMarine Distress Procedure DSC Tell where you areTo Order Online Accessories Order InfoIncluded In This Package For Credit Card OrdersMounting Mounting Powering The RadioMounting And Powering The Radio Length Wire Gauge Electrical Power ConnectionTo Connect To a Power Source Safe Maximum Permissible Exposure MPE Radius Installation RequirementsAntenna Requirements Attachment Antenna Requirements And AttachmentExternal Devices And Connections External Devices ConnectionsGetting Started Tones And AlarmsPower On-Off VolumeSquelch To Decrease The Volume You Can Choose One Of The FollowingTo Receive Weaker Signals Standby And ReceiveLCD Contrast Set-Up Routines Settings MenuSet-Up Routines LCD BacklightTime Offset Confirmation tone setting on or OFFConfirmation Tone A./International/Canada Channel MapsChannels Transmit Power OutputVoice Transmission Voice TransmissionWeather Alert Set-Up Weather Radio And AlertPublic Address Noaa All Hazards/Weather Radio And AlertTri-Watch Weather Alert SignalAdvanced Operation Advanced OperationMemory Scan Memory ChannelsIf You Incorrectly Enter Your Mmsi Number Digital Select Calling DSC SetupDSC Set-Up User Mmsi NumberDSC Scanning If You Transfer Your Radio To a Different VesselGroup Mmsi Number To Enter Or Edit Names And Mmsi Numbers In The Directory Position Request Reply TypeIndividual Directory To Set The Position Request Reply TypeSending Distress Calls Digital Select Calling DSC OperationDSC Operation Receiving Distress Relay Calls Receiving Distress CallsSending An All Ships Calls Regarding Distress Relay CallsReceiving a Geographical Call Receiving An All Ships CallSending An Individual Call Sending a Geographical CallSending a Group Call Receiving An Individual CallReceiving a Group Call Sending a Position RequestIf The Station You Called Cannot Send Its Position To Exit The Position Request ModeIf The Station You Called Chose Not To Reply If You Receive a PositionReceiving a Position Send Receiving a Position RequestSending a Position Send To Clear Messages From The Call Log Memory Call Log and Distress LogTroubleshooting Maintenance TroubleshootingSpecifications MaintenanceEnglish Nothing Comes Close to a Cobra VHF Marine Channel Assignments 05A 01A03A 04A21A 18A19A 20A62A 25B28B 61A81A 78A79A 80AVHF Marine Channel Assignments English Weather Channel AssignmentsFor Products Purchased In the U.S.A WarrantyWorld City Time Zones World City Time ZonesFlush Mount Template / Plantilla para montaje empotrado Product Service

MR F75-D specifications

Cobra Electronics has long been a name associated with reliable communication solutions, and the MR F75-D is no exception. This high-performance marine VHF radio is designed specifically for boaters, offering a blend of essential features, advanced technologies, and user-friendly characteristics that make it an excellent choice for both recreational and commercial marine applications.

One of the standout features of the MR F75-D is its Class D DSC (Digital Selective Calling) capability, which allows users to send distress calls and communicate with other vessels or coast guard stations at the push of a button. This increases safety on the water, as it provides an automated means to alert others in case of emergencies.

The radio operates seamlessly on the vital marine channels, ensuring that users have access to all the necessary frequencies for navigation and communication. With an impressive 25 watts of transmitting power, the MR F75-D provides extended range, ensuring that calls can be made even in challenging conditions.

The Cobra MR F75-D boasts an ergonomic design featuring a solid weather-resistant construction to withstand the harsh marine environment. Its large, easy-to-read backlit LCD display enhances readability in bright sunlight or low-light conditions, making it accessible under various circumstances.

Moreover, the radio includes a built-in NOAA weather radio with alerts. This feature keeps users informed about local weather conditions and forecasts, enabling them to make better decisions while out at sea. The option to scan channels and save favorites makes it easy to navigate through crowded frequencies to find the right communication line.

The MR F75-D is equipped with Dual Watch and Tri-Watch functions, allowing users to monitor two or three channels simultaneously. This increases the chances of receiving essential messages while on the water, providing greater peace of mind.

With a compact design, the MR F75-D can fit easily on most boats, while the intuitive controls enhance usability. The radio also supports external GPS connection, offering even better situational awareness.

In conclusion, the Cobra Electronics MR F75-D is a versatile, durable, and feature-rich marine VHF radio. With its DSC capabilities, NOAA weather notifications, and robust build, it proves to be an invaluable tool for safe and efficient marine communication, making it a top choice for any boating enthusiast.
Top Page Image Contents