Eagle Electronics EVR-100 manual Checklist

Checklist

The following items should be supplied in the box. Check before starting the installation and con- tact your dealer if an item is missing.

NOTE: An antenna is NOT provided. Consult your Eagle dealer for advice if necessary.

1.Mounting gimbal for the VHF radio

2.Power supply cable with inbuilt 3 Amp fuse

3.External speaker connection cable with white (+) wire and black (-) wire

4.Two mounting knobs

5.Microphone bulkhead mount

6.Four self-tapping screws for the mounting gimbal

7.Four flat screws for the mounting gimbal

8.Four spring washers for the mounting gimbal

9.Four plain washers for the mounting gimbal

10.Four nuts for the mounting gimbal

11.Two self-tapping screws for the microphone bulkhead mount

12.Two flat screws for the microphone bulkhead mount

13.Two spring washers for the microphone bulkhead mount

14.Two plain washers for the microphone bulkhead mount

15.Two nuts for the microphone bulkhead mount

16.Two flush-mount brackets for recessed installation

17.Two M5x32 screws for recessedinstallation

18.Two M5x10 screws for recessed installation

19.Two plastic stoppers for the recessed installation (not pictured)

20.Installation template (not pictured)

21.One 3 Amp spare fuse (not pictured) in case of accidental reverse of battery polarity

22.Base unit and microphone (not pictured)

1

4

5

6

7

8

9

10

2

3

17 & 18

16

11

12

13

14

15

6 EAGLE EVR-100Operation Instructions