Saved Number Dial, Special Characters | Lucent Technologies MLX-20L

Often-Used Features

Saved Number Dial

Must be programmed on a button. To program:

See Programming Buttons & Settings, p. 20.

Use this feature to redial a busy or unavailable number that you want to try later.

To use:

1.Before hanging up, press the programmed Saved Number Dial button.

2.Press the same type of button used to place the call (for example, ICOM, Pool, or SA).

3.To redial, press the programmed Saved Number Dial button.

Special Characters

Features that dial numbers automatically may need special characters to allow for correct dialing or system response.

Press...	See...	Means...
Drop	s	Stop. Halts dialing
		sequence to allow for
		system response.
Hold	p	Pause. Inserts 1.5-sec
		pause in dial sequence.
		Multiple consecutive
		pauses allowed.
Conf	f	Flash. Sends
		switchhook flash. Must
		be first entry in
		sequence.

### For Extension Programming only (Ext Program [Prog]): End of Dialing. Use to signal end of dialing sequence or to separate grouped digits.

## For dialing and Directory listings: End of Dialing. Use to signal end of dialing sequence or to separate grouped digits.

System Speed Dial

To program:

See Programming Buttons & Settings, p. 20.

You can program 3-digitSystem Speed Dial codes on a button. These are the same numbers that are available from the System Directory (p. 14). Dial these directly by pressing the Feature button and dialing the code (600–729).

Voice Announce

To program:

See Programming Buttons & Settings, p. 20.

Make voice-announced calls from ICOM Voice or SA Voice buttons on your phone (see Line Buttons, p. 2) or use Paging (p. 16). The Voice Announce feature allows you to prevent voice announcements and paging calls from interrupting you. Instead, the calls ring. Voice Announce is a setting that you can turn on or off without programming a button for it. If you have a data station at your extension and Voice Announce on, you should turn Voice Announce off.

Often-Used Features