FUNCTION KEYS:
SET KEY
∙Press and hold for 3 seconds to enter the SET mode, where the following can be changed: LCD contrast, Manual time setting, 12/24 hour time display, Date setting, °F/°C temperature unit, Wind speed unit, Rainfall unit, Pressure unit, Relative pressure reference setting, Weather tendency threshold setting, Storm warning threshold setting, Storm Alarm On/ Off setting, Wind direction display type, and Factory reset
∙Press to toggle between the display of Mode 1 or Mode 2:
oMode 1: "Wind speed + outdoor temp + 24 hr. pressure history graph" o Mode 2: "Gust + Dew Point temp + 72 hr. pressure history graph "
∙In the weather alarm setting mode, press to switch the weather alarm On / Off
∙In the weather alarm setting mode, press and hold to adjust the weather alarm value
∙Stop the weather alarm when ringing
▲UP ARROW KEY
∙Press to toggle between the display of seconds or date in the time display
∙Press to increase the level of different settings in SET mode
∙Press and hold to
∙Press to reset the MIN/MAX record when in MIN/MAX display mode
∙Stop the weather alarm when ringing
▼DOWN ARROW KEY
∙Press to switch the rainfall display mode: Total, 1h, 24h, week, month
∙Press to decrease the level of different settings in SET mode
∙Synchronize the display with the PC (see Heavy Weather Pro Software User’s Guide)
∙Stop the weather alarm when ringing
ALARM KEY
∙Press to enter the time alarm and weather alarm setting mode
∙Confirm particular alarm setting
∙Press to exit the manual setting mode
∙Stop the alarm when the time alarm or weather alarm rings
∙Press to exit max/ min record display mode
∙Stop the weather alarm when ringing
MIN/MAX KEY