Mode 2 displays the following wind data:
∙Wind direction
∙Wind chill in °F or °C
∙Wind gust in mph, km/h, bft, knots or m/s
RAINFALL MEASUREMENT
The 1hour,
∙Press the ▼DOWN ARROW to select the rainfall display from the following modes:
1.Total rainfall - reset manually (see "RESET THE MIN/MAX WEATHER DATA")
2.Last 1 hour rainfall – updates every four minutes, totals last 15 measurements
3.Last 24 hours rainfall from current time.
4.Last week rainfall - reset every Monday night at 12:00am (midnight)
5.Last month rainfall - reset every 1st of month at 12:00am (midnight)
VIEWING THE MIN/MAX WEATHER DATA
The weather station will record the maximum and minimum value of the various weather data with time and date of recording automatically. The following stored maximum and minimum weather data can be viewed by pressing the MIN/MAX key in normal display mode.
1.MIN/MAX indoor temperature with the date and time of recording
2.MIN/MAX indoor humidity with the date and time of recording
3.MIN/MAX outdoor temperature with the date and time of recording
4.MIN/MAX dew point temperature with the date and time of recording
5.MIN/MAX outdoor humidity with the date and time of recording
6.MAX wind gust with the date and time of recording
7.Total rainfall with the date the rainfall total was last reset. If the rainfall total has not yet been reset,
RESET THE MIN/MAX WEATHER DATA
1.Press MIN/MAX key to show the desired weather data.
2.Press ▲UP ARROW key. The stored value will be reset to the current value and current time. To reset the MIN/MAX weather data, you need to reset each of the values independently.
TOTAL RAINFALL AMOUNT
The total rainfall measurement is displayed in the unit of mm or inch. It shows the total rainfall accumulated since last reset of the total rainfall amount.
In either Mode 1 or Mode 2 display, press the MIN/MAX key until the display shows the total rainfall value.