OPERATION (CONTINUED)
HOW TO INSTALL BATTERIES
To install the batteries, follow the procedures below:
1.Slide down the cover to access most of the remote buttons. Slide down further to access the battery compartment.
2.Insert two “AAA” size Alkaline batteries following the polarity diagram below.
TIMER |
|
ON/OFF ENTER/ | TURBO/MILD |
CANCEL |
|
+ | – |
– | + |
BATTERY PRECAUTIONS
The precautions below should be followed when using batteries in this device:
1.Use only the size and type of batteries specified.
2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.
3.Do not mix different types of batteries together (e.g. Alkaline and
4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufac- turer’s directions).
CELSIUS TO FAHRENHEIT CONVERSION CHART
CELSIUS | FAHRENHEIT | CELSIUS | FAHRENHEIT |
|
|
|
|
18 | 64.4 | 26 | 78.8 |
19 | 66.2 | 27 | 80.6 |
20 | 68 | 28 | 82.4 |
21 | 69.8 | 29 | 84.2 |
22 | 71.6 | 30 | 86 |
23 | 73.4 | 31 | 87.8 |
24 | 75.2 | 32 | 89.6 |
25 | 77 |
|
|
|
|
|
|
NOTES:
•When operating the remote controller, make sure there are no obstructions between the remote controller and the re- mote sensor.
•After a while the display goes blank to conserve battery power. To check the settings, press the ON/OFF button once.
20
