TO OPERATE FAN ONLY
To operate only the fan so the unit will circulate the air, proceed as follows:
1.Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ON” will light in the remote display.
3.To select a fan speed, press the FAN SPEED button until the desired speed appears in the display (see below).
2.Press the MODE button until the
Fan indicator 
appears in the display.
No allowance setting temperature
FAN SPEEDS
“
”The fan will operate on low speed.
“
”The fan will operate on medium speed.
“
”The fan will operate on high speed. “NATURAL” The fan will randomly cycle through the
speeds simulating a breeze.
NOTE:
•If “NATURAL” is selected, the NATURAL” indicator on the indoor unit will light.
TO SET UNIT TO DEHUMIDIFIER MODE
Select this mode when there is high humidity. To select, follow the procedures below.
1.Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ON” will light in the remote display.
3. Using the TEMP. ▼or▲ but- tons, set the desired temper- ature. The desired tempera- ture can be changed up to 32°C and down to 18°C.
2.Press the MODE button until the
Dehumidifier 
indicator appears in the display.
22
