Installation

WMS190

Before You Begin

Before you begin, always disconnect the battery negative terminal.

Important Notes

•Before final installation, test the wiring connections to make sure the unit is connected properly and the system works.

•Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

•Consult with your nearest dealer if installation requires the drilling of holes or other modifications to your vessel.

•Install the unit where it does not interfere with driving and cannot injure passengers if there is a sudden or emergency stop.

•Avoid installing the unit where it will be subject to high temperatures from direct sunlight, hot air, or where it would be subject to excessive dust, or dirt.

DIN Front Mount

1.Check the dashboard opening size by sliding the radio into it. If the opening is not large enough, carefully cut or file as necessary until the radio slides into the opening. Check that there will be sufficient space behind the dashboard for the radio chassis.

4.After completing the wiring connections, turn the unit on to confirm operation (vessel accessory switch must be on). If the unit does not operate, recheck all wiring until the problem is corrected. Once proper operation is achieved, turn the accessory switch off and proceed with final mounting of the chassis.

5.Carefully slide the radio into the opening, making sure it is right-side-up.

6.Secure the radio to the dashboard using the screws provided.

7.Replace the covers on either side of the radio.

8.Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut and spring washer provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and plain washer provided. Bend the strap, as necessary, to position it.

9.Test radio operation by referring to the operating instructions for the unit.

Removing the Unit

To remove the radio after installation, remove the covers and unscrew the installation screws, and then pull the radio out.

Reconnect Battery

When wiring is complete, reconnect the battery negative terminal.

CAUTION: The rear of the radio must be supported with the strap to prevent damage to the radio and supporting structures.

2.Place the radio in front of the dashboard opening so the wiring can be brought through the opening.

3.Follow the wiring diagram carefully and make certain all connections are secure to ensure proper operation.

WMS190 specifications

The Jensen WMS190 is an advanced warehouse management system designed to streamline operations and enhance efficiency in logistics and inventory management. This state-of-the-art software solution provides businesses with a robust platform to optimize their warehouse operations, ensuring that goods are accurately tracked and efficiently handled throughout their lifecycle.

One of the main features of the Jensen WMS190 is its real-time inventory tracking capability. Utilizing barcoding and RFID technology, the system allows for precise monitoring of stock levels, minimizing discrepancies and ensuring that inventory data is always current. This real-time visibility not only helps in maintaining optimal stock levels but also supports better decision-making regarding restocking and order fulfillment.

The system also offers advanced order management features. It automates the order picking process, using algorithms to determine the most efficient picking paths for warehouse workers. This not only speeds up order fulfillment but also reduces labor costs and enhances overall productivity. Additionally, the WMS190 integrates seamlessly with various enterprise resource planning (ERP) systems, facilitating smooth communication and data sharing across different business units.

Another notable characteristic of the Jensen WMS190 is its customizable dashboard. Users can tailor the interface to suit their specific operational needs, enabling quick access to pertinent information and performance metrics. This level of customization allows for greater control over warehouse operations, as managers can monitor key performance indicators in real-time.

The Jensen WMS190 is built with scalability in mind, making it suitable for businesses of all sizes, from small distribution centers to large-scale warehouses. Its modular design allows companies to implement the features they need while retaining the option to expand as their operations grow.

Moreover, the system enhances labor management through detailed analytics and reporting tools. By analyzing employee performance, companies can identify areas for improvement and implement targeted training programs to enhance workforce efficiency.

In summary, the Jensen WMS190 stands out as a powerful tool in warehouse management, offering cutting-edge technologies, customizable features, and scalability. By leveraging its advanced capabilities, businesses can achieve greater operational efficiency, reduce costs, and improve overall service levels. The integration of real-time inventory tracking, automated order management, and robust analytics makes the WMS190 a vital asset for any organization looking to optimize its warehouse processes.