Audio Menu, Power On/Off, Volume Control, Mute

MSR3007

BASIC OPERATION

					Use a ball point pin or thin metal object to press the RESET button (18). This may be
1	4	24	23	12 11 3 22	necessary should the unit display an error code.
					You can recover factory default settings using the RESUME function located on the system

menu. With “YES” flashing, press the MODE button (4) to activate.

POWER

	EQ	AUDIO
VOLUME	IX BASS	MENU
		TUNE/TRK
	INFO	SEEK
	INFO

Audio Menu

Press the AUDIO button (3) on the control panel to access the audio menu. You can navigate

through the audio menu items by pressing the AUDIO button repeatedly. Once the desired

CAT	MODE	+					SCROLL	SEEK
CAT	SEL	CAT						TUNE/TRK
	VOLUME						BAND
						40W x 4	SEARCH	AUX
								AUX
								IN
MUTE		1	2 INT	3 RPT	4 RDM	5	6	AS/PS
								AS/PS

20menu item appears on the display, adjust that option by pressing the VOLUME +/- buttons (2) within 5 seconds. The unit will automatically exit the audio menu after five seconds of inactivity.

The following menu items can be adjusted.

Bass Level

Use the VOLUME buttons to adjust the Bass level range from “-6” to “+6”.

17 18 14

10 16 15

Power On/Off

Press any button on the front panel to turn the unit on. Press the POWER button (1) to turn the unit off.

•If a disc is being inserted when the radio power is off and the ACC (accessory switch) is on, the unit will automatically power up and playback will start.

•If a CD is present, playback resumes at the last position in memory before the ignition was turned off or the POWER button was pressed.

•If no CD is present, the unit will resume at the last mode selected (Tuner, Aux, etc.). The POWER button is illuminated whenever the IGN lead (red wire) is powered, regardless of whether the unit is on or off.

Volume Control

To increase the volume, press the VOLUME + button (2a). To decrease the volume, press the VOLUME - button (2b).

Mute

Press the MUTE button (17) on the control panel to mute the audio output. Press MUTE again to restore the audio output to the previous level.

Mode

Press the MODE button (4) on the control panel to select a different mode of operation, as indicated on the display panel. Available modes include Tuner, SIRIUS, CD, iPod and AUX In (optional Auxiliary Input).

NOTE: CD, IPOD, or SIRIUS mode will be skipped if the module is not installed.

Reset

The reset button should be activated for the following reasons:

•initial installation of the unit when all wiring is completed

•function buttons do not operate

•error symbol on the display

Treble Level

Use the VOLUME buttons to adjust the Treble level range from “-6” to “+6”.

Balance

Use the VOLUME buttons to adjust the Balance between the left and right speakers from “L12” (full left) to “R12” (full right).

Fader

Use the VOLUME buttons to adjust the Fader between the rear and front speakers from “R12” (full rear) to “F12” (full front).

Volume Level

Use the VOLUME buttons to adjust the Volume level.

System Menu

1.Press and hold the AUDIO button (3) for more than 3 seconds to enter the system menu. “MENU” will appear on the display, followed by the first menu item, “CONTRAST.”

2.Press the TUNE/TRK >> or << button (21, 20) or press the AUDIO button repeatedly to navigate the system menu and select the desired item.

3.Press the VOLUME +/- buttons (2) to adjust the selected menu item.

4.Press the AS/PS button to return to the previous operation immediately or wait for 5 seconds to return automatically.

The following items can be adjusted:

•CONTRAST (0 – 10): Set LCD contrast.

•LOW BATT (ON/OFF): Monitor voltage on ACC line.

•LOCAL: This mode favors access to local stations whose signals are much stronger, thereby improving radio reception.

•Distant: This is terminate the local receive mode to nomal receive mode

•AREA (USA/LATIN/EUROPE): Set frequency spacing for various regions.

•VOL PGM (0 – 46): Select an automatic turn-on volume.

•BEEP TONE (ON/OFF): Turn the audible beep ON/OFF (heard when functions/buttons

are selected). NOTE: Beep tone off will not affect LOW BATT audible tone.

•RESUME: Return the EEPROM to factory default set up values and reset the Sirius Tuner Settings. "Yes" will blink on the LCD to confirm. Press MODE to select.