Grundig Cosmopolit 3F+ WEB iP Selecting the tuner input source, Selecting stations from presets

Selecting the tuner input source

1Press »M« repeatedly on the remote control or »MODE« on the device until »FM radio« ap- pears on the display.

Selecting stations – from presets

1 In the »FM radio« mode, press »1« to »0« on the remote control to select the presets from 1 to 10;

–The frequency of the station and the preset number appear in the display and the sta- tion is then played.

Selecting stations – from the list Recall Preset

1Press »FAV«.

2 Select the presets from 1 to 10 by pressing »« or »« or by turning the Jog-Shuttle.

3Confirm the preset by pressing »OK«.

–The preset number appears in the display and the station is then played.

Displaying RDS station informa- tion

If the device is receiving a RDS station, the sta- tion name and »R.D.S« appear in the display (if no information is available, the reception fre- quency appears in the display).

Station and track information appear as ticker text (radio text). If radio text is not available, other information can be displayed as an alter- native.

1 To display information on the current RDS sta- tion, press »i« repeatedly.

–The following displays appear in succession:

The current programme type (PTY), e.g. »Pop Music«. »[No PTY]« appears if no information is available;

the frequency; the current date.

Note:

7The information is displayed continuously until »i« is pressed again.