SPECIAL
Displaying Software and ID information
1Press »MENU« to open the menu.
2Select the option »System settings« by pressing »« or »« or by turning the
3 Select the option »Info« by pressing »« or »« or by turning the
Time/Date Info
SW version:
GRUNDIG_CP_3F_IP_DAB Version 2.00
Radio ID: 00226XXXXXXX
–The software version and the Radio ID (MAC address) are displayed.
4Press »MENU« to end the display.
Displaying information and net- work status
You can display information about your device and the network used. Settings cannot be made in this menu.
1Press »MENU« to open the menu.
2Select the option »System settings« by pressing
»« or »« or by turning the
3 Select the option »Network« by pressing »« or »« or by turning the
4 Select the option »View settings« by pressing »« or »« or by turning the
5 Select the required information by pressing »« or »« or by turning the
–Display: »Active connection« e.g. WLAN is active;
»WLAN region:« e.g. Most of Europe; »DHCP:« e.g. DHCP enabled; »SSID:« network name, e.g. »Netgear«; »IP address:« (e.g. 192.168.99.131);
42 ENGLISH
»Subnet mask:« (e.g. 255.255.255.0); »Gateway address:« (e.g. 192.168.2.1); »Primary DNS:« (e.g. 192.168.2.1) »Secondary DNS:« (e.g. 0.0.0.0).
6Press »MENU« to end the display.
Installing an additional network
Use this function when you wish to operate your device at a different location using a different network.
The first network (home network) is retained.
1Press »MENU« to open the menu.
2Select the option »System settings« by pressing
»« or »« or by turning the
3 Select the option »Network« by pressing »« or »« or by turning the
Time/Date |
|
Internet Setup |
|
Internet Wizard |
|
PBC Wlan setup |
|
View settings |
|
Wlan region | > |
Manual settings |
|
4Select the option »Internet Wizard« (if a stand- ard router is used) or the option »PBC Wlan setup« (if a router with
Note:
7 If the option »PBC Wlan setup« has been selected, press the WPS button on the router and then continue the registration using »OK«.
7 Your device is registered on the router auto- matically. No further settings are required.