Icom IC-F3022T/S User set mode, Dtmf transmission, Using TX Code Enter KEY, To Select a TX Code

3 BASIC OPERATION

USING [TX CODE ENTER] KEY:

qSelect the desired TX code channel via [TX Code CH

Select]+[CH Up] or [CH Down], [TX Code CH Up] or [TX Code CH Down]. (p. 13)

wPush [TX Code Enter] to enter the TX code edit mode. e Push [TX Code Enter] several times to select the desired

digit to be edited.

•The digit to be edited blinks.

rPush [CH Up], [CH Down] or 10-keypad* to set the desired digit.

tPush [TX Code Enter] to set the digit. The digit to the right will blink automatically.

•When the 10-keypad* is used for setting, the digit to be edited moves to the right automatically without pushing [TX Code Enter].

yRepeat r and t to input all allowable digits.

uAfter setting the last digit, push [TX Code Enter] to set the code and return to the stand-by mode.

*10-key versions only

DDTMF transmission

If the transceiver has [DTMF Autodial] assigned to it, the auto- matic DTMF transmission function is available. Up to 8 DTMF channels are available.

TO SELECT A TX CODE:

qPush [DTMF Autodial]— a DTMF channel appears.

wPush [CH Up] or [CH Down] to select the desired DTMF channel.

ePush [DTMF Autodial] to transmit the DTMF code in the selected DTMF channel.

■User set mode

User set mode is accessed at power ON and allows you to set seldom-changed settings. In this case you can “cus- tomize” the transceiver operation to suit your preferences and operating style.

Entering the user set mode:

qWhile pushing and holding [Side2] and [Side3], rotate [VOL] to turn the power ON. Then, push and hold [P0] for 1 sec. to enter user set mode.

wPush [P0] several times to select the appropriate item. Then push [CH Up] or [CH Down] to set the desired level/condition.

•Available set mode functions are Backlight, Beep, Beep Level, SQL Level, Mic Gain, Battery Voltage and Signal Moni.

eRotate [VOL] to turn the power OFF to exit user set mode.

NOTE: User set mode is also available via a programma- ble function key. Refer to “USER SET MODE KEY.” (p. 9)

14