Icom IC-F3022T/S instruction manual Battery Charging

Page 21

WARNING! Immediately stop using the battery if it emits an abnormal odor, heats up, or is discolored or deformed. If any of these conditions occur, contact your Icom dealer or distrib- utor.

WARNING! Immediately wash, using clean water, any part of the body that comes into contact with fluid from inside the bat- tery.

WARNING! NEVER put the battery in a microwave oven, high-pressure container, or in an induction heating cooker. This could cause a fire, overheating, or cause the battery to rupture.

CAUTION! Always use the battery within the specified tem- perature range for the transceiver (–25˚C to +55˚C) and the battery itself (–20˚C to +60˚C). Using the battery out of its specified temperature range will reduce the battery’s perfor- mance and battery life. Please note that the specified tem- perature range of the battery may exceed that of the trans- ceiver. In such cases, the transceiver may not work properly because it is out of its operating temperature range.

CAUTION! Shorter battery life could occur if the battery is left fully charged, completely discharged, or in an excessive tem- perature environment (above +45˚C) for an extended period of time. If the battery must be left unused for a long time, it must be detached from the radio after discharging. You may use the battery until the battery indicator shows half-capacity, then keep it safely in a cool dry place with the temperature between –20˚C to +25˚C.

BATTERY CHARGING 4

DCharging caution

RDANGER! NEVER charge the battery pack in areas with extremely high temperatures, such as near fires or stoves,

inside a sun heated car, or in direct sunlight. In such environ-

4

ments, the safety/protection circuit in the battery will activate, causing the battery to stop charging.

WARNING! DO NOT charge or leave the battery in the bat- tery charger beyond the specified time for charging. If the bat- tery is not completely charged by the specified time, stop charging and remove the battery from the battery charger. Continuing to charge the battery beyond the specified time limit may cause a fire, overheating, or the battery may rup- ture.

WARNING! NEVER insert the transceiver (battery attached to the transceiver) into the charger if it is wet or soiled. This could corrode the battery charger terminals or damage the charger. The charger is not waterproof.

CAUTION! DO NOT charge the battery outside of the speci- fied temperature range: BC-160 (0˚C to +45˚C). Icom recom- mends charging the battery at +20˚C. The battery may heat up or rupture if charged out of the specified temperature range. Additionally, battery performance or battery life may be reduced.

17

Page 20 Page 22
Image 21
Page 20 Page 22
Contents IF3022T/S Pletely before using the transceiver Do not push PTT when not actually desiring to trans- mitWord Definition Rwarning Page Table of Contents Accessories Supplied accessoriesFlexible antenna Belt clip Battery packTo detach the jack cover Jack coverFront panel Panel DescriptionSpeaker Microphone Desired function can be programmed by your dealer. p0VOLUME Control VOL Rotate to turn the power ON/OFF and adjusts the audio levelAfter the transceiver is turned OFF 0ALPHANUMERIC Display Function displayProgrammable function keys Moni KEY Prio A/B KeysLock KEY HIGH/LOW KEYSurveillance KEY User SET Mode KEYSiren KEY TX Code Enter KEYTurning power on Battery type selectionBasic Operation Channel selection Call procedureNON-ZONE Type Zone TypeReceiving and transmitting Transmitting notesSelected channel is a ‘receive only’ channel Using TX Code CH UP/TX Code CH Down KEY Using TX Code CH Select KEYTX code channel selection DTX code number editUsing TX Code Enter KEY User set modeRotate VOL to turn the power OFF to exit user set mode Dtmf transmissionScrambler function Emergency transmissionStun function Priority a channel selectionBattery Charging Battery Charging Optional battery chargers AD-106 installationRapid charging with the BC-160 Rapid charging with the BC-121N+AD-106 Rapid charging with the BC-119N+AD-106IMPORTANT! Battery charging caution Optional battery case BP-240 Battery CaseMB-93 contents Optional Swivel Belt ClipAttaching Detaching OPC-515L/OPC-656 DC Power Cables OptionsProvides pager and code squelch capabilities Provides clear receive audio in noisy environment VS-1L VOX/PTT switch box for hands-free operation, etcHS-94/HS-95/HS-97 Headset + VS-1L VOX/PTT Case HS-94 Ear-hook type HS-95 Neck-arm type HS-97DOC Memo Kamiminami, Hirano-ku, Osaka 547-0003, Japan Intended Country of Use

IC-F3022T/S specifications

The Icom IC-F3022T/S is a robust and versatile handheld transceiver designed for reliable communication in various professional settings. Known for its durability and user-friendly operation, this model is particularly popular among security personnel, construction teams, and emergency services.

One of the standout features of the IC-F3022T/S is its wide frequency range, supporting VHF or UHF bands that enable clear communications over considerable distances. This flexibility makes it suitable for different operational environments, ensuring users can stay connected regardless of their location. The device operates on both analog and digital modes, offering versatility to accommodate various communication needs.

The rugged construction of the IC-F3022T/S is a significant characteristic of this model, designed to withstand harsh working conditions. With an IP54/55 rating for water and dust resistance, it assures users that the radio will function reliably in inclement weather and challenging environments. The device can endure drops and impacts, making it suitable for active fieldwork.

Another notable feature is the advanced audio quality delivered by the IC-F3022T/S. Equipped with high-output audio and a powerful speaker, users can enjoy clear sound even in noisy environments. The built-in loudspeaker is designed to provide excellent clarity, allowing users to communicate effectively without straining to hear the messages.

The IC-F3022T/S also supports extensive battery life with its efficient power management system. Users can opt for various power settings, enabling them to extend operational time when needed. The device is compatible with a range of batteries, including high-capacity lithium-ion options for extended usage.

Programmability is another key aspect of the IC-F3022T/S. The built-in keypad allows for easy access to frequently used functions, enhancing workflow efficiency. Advanced features like CTCSS and DCS codes improve privacy and reduce interference from other communications.

In conclusion, the Icom IC-F3022T/S combines durability, versatility, and advanced technology to cater to diverse communication needs in demanding environments. Its impressive features and reliability make it a favorite among professionals who require a dependable and robust communication tool. Whether for security, construction, or emergency response, the IC-F3022T/S stands out as an excellent choice in the realm of handheld radios.
Top Page Image Contents