Pioneer PDR-W839 manual Automatically numbering tracks, Setting the fade length Press MENU/DELETE

Page 27

MENU/

DELETE

FADER

4¢￿

ENTER

7

￿×óBÀöù²/

COMPACT DISC RECORDER / MULTI-CD CHANGER

3-COMPACT DISC MULTI CHANGER

5 Recording Features

COMPACT DISC DIGITAL RECORDER

MENU/

DELETE

¦￿ REC VOL

7

PUSH ENTER

CD TEXT LegatoLinkConversion

Recording fade ins and fade outs

Sometimes, for example if you're recording just an excerpt from something, it may be better to fade in the recording, then fade out again at the end, rather than start and end abruptly. You can also set longer or shorter fade times so that they match the fades on other songs in your mix. Note that you can’t record a fade in when in synchro recording mode (although you can record a fade out).

Setting the fade length

1Press MENU/DELETE.

2Turn the jog dial (4 and ¢ on the remote) until FADER TIME ap- pears in the display, then press to

ENTER.

3Use the jog dial (4 and ¢ on the remote) to set the length of the fade

(in seconds).

Each turn will take you forward (or back) one second. The default is 5 seconds.

4Press the jog dial (ENTER) to confirm the new fade length.

Recording a fade in

¥With the source playing, press FADER during record-pause mode to fade in. Recording starts with a gradual fade in.

Recording a fade out

¥Press FADER during recording to fade

out.

After recording the fade out, the recorder goes into record- pause mode. This happens in either normal or synchro record mode.

• You can also just press 7if you don’t need a fade out.

If you record a fade out during all-track sync mode, the synchro mode is canceled after the fade out (see pages 39– 42 for more on synchro recording).

Automatically numbering tracks

You can record from any source, letting the recorder number the tracks automatically. From a digital source (CD, MD, DAT, or DCC), the recorder will start new tracks as they change on the source material. When recording other sources, the recorder will start a new track if it detects more than 2 seconds of silence before the next sound on the source. You can adjust the level that the recorder regards as “silence” (see Setting the silence threshold below).

1Press MENU/DELETE.

2Turn the jog dial (4 and ¢ on the remote) until AUTO TRACK appears

in the display, then press to ENTER.

The display shows either ON or OFF. ON is the default.

3Turn the jog dial (4 and ¢ on the remote)to switch AUTO TRACK ON or OFF.

4Press the jog dial to ENTER.

To check that tracks will start at the correct points on the

recording, see Monitoring a source for recording on page

39.

27

En

Page 26 Page 28
Image 27
Page 26 Page 28
Contents PDR-W839 Important Safety Instructions Information to User For U.S. and Canadian modelsClass Laser Product Infringement of Copyright For U.K. modelContents Checking whats in the box Using this manualHints on installation Before You StartMoving the unit CD lens cleanerPower cord caution Maintaining your CD recorderRecording copyright material Recording and finalizing discsPlaying partially recorded discs Connecting the control cord Connecting optical cordsConnecting coaxial cords Connecting stereo audio cordsKeyboard controls Connecting a keyboardOPEN/CLOSE Power Ðoff / -ON- Press to switch the unit on Or offFront panel Press to stop playback or recordingProgram Program the playback track order. p.36,37 Remote controlControls and Displays Recording. p.27,38Disc 1/2/3 Indicates discs loaded DisplayRecording tracks during playback Setting the headphone levelGetting Started Quick CD recordingPress OPEN/CLOSE 10 again to close the disc tray Power to switch onIf the disc was paused, then the pause mode is canceled Playing a CDStarting playback with a timer Using the menu featuresPlayback modes Switching the display CD1NEW Music CD-R Recording time left on CD-R/CD-RW discTrack number / time remaining Total elapsed recording time During recording, press Display to switch the display modeRecording Features IntroductionRecording a CD Press CD =CD-R Start front panel Only Press REC Mode twiceRecording individual tracks Disc you want to recordThere are two recording options Heres how to record starting from any point on the discProgram To recordPress CD =CD-R Start REC this R S T U V W X Y ZJog dial Using CD textStopped Press NameEditing CD text Press the jog dial Enter Press Name to leave the track name modeGo to the track with the name you Want to copy Press Name Clip againDisplay, then press to Enter Setting the fade length Press MENU/DELETEAutomatically numbering tracks SecondsStart recording Setting the silence thresholdMake sure automatic track number Ing is switched OFF Manually numbering tracksChanging the recording speed Setting the recording levelPress 41 or Á¢ CD-R side To switch the copying speed Hi indicator shows the selected speed x1 orTurn the jog dial until Balance Setting the balanceThen press REC Mode When youÕre satisfied withPress Finalize Press 7CD-R side here to cancel finalizationFinalizing a disc Load the Cdðr or Cdðrw you want to finalizeErase ALL ? CD-RW Finalizing and ErasingErasing a Cdðrw disc Erase Last ? CD-RWErase TOC ? Erase ALL ?Initialize ? CD-RW Play the track you want to to skip Press Skip SET Skip indicator starts to blinkMarking recorded tracks to skip O2 Skip SET?O2 Skip CLR? Playing a disc with skip IDsPlayback Functions Clearing the playlistCDÐ Trkpgm ÐÐ Using the repeat modes Programming a playlist CD-RCdðr Trkpgm ÐÐ Press Fader during playback to pause the disc Using the random modeFading in and fading out Press Random to start random playbackTo stop monitoring, press 7 CD-R side Pressing Input repeatedly switches the active inputMonitoring a source for recording Display shows monitoring infor MationDigital synchro recording Recording Other SourcesPress Input to choose the analog Line inputs Analog synchro recordingPress Input to choose the input to Use For digital sources, check that Signal is compatibleAdjust the recording level, if necessary When youre finished, press 7 to stop RecordingTo restart recording, press Recording blank sectionsWhile recording, or in record-pause Mode, press To finish the recording session here, pressAdditional Information Digital recording from DAT Digital signal interruptionsPower interruptions Digital recording restrictionsAn attempt is made to start Understanding display messagesOpen the disc tray and make sure that nothing is Error messagesObstructing it. If the problem persists, contact a Open the disc tray and reload the disc. Make sureWhen the Synchro button was Messages relating to recordingStop the source player. After a short time Troubleshooting Specifications We Want You Listening ForALifetime For U.S. and Canadian models only

PDR-W839 specifications

The Pioneer PDR-W839 is a sophisticated component designed for audio enthusiasts who appreciate the nostalgia and warmth of CD recording and playback technology. This versatile CD recorder combines advanced digital audio technology with user-friendly features, making it an appealing addition to any home audio setup.

One of the standout features of the PDR-W839 is its ability to easily record from various sources, such as vinyl records, cassette tapes, or even through external microphones. The device is equipped with a high-quality analog-to-digital converter, which ensures that recordings maintain their integrity, capturing every nuance and detail of the audio source. This feature positions the PDR-W839 as an excellent tool for archiving old audio content into modern formats.

The PDR-W839 supports a wide range of CD formats, including CD-R and CD-RW, allowing users to create permanent or rewritable discs based on their needs. The process of recording is streamlined through an intuitive interface that allows for easy track selection and disc management. Users can easily edit tracks or create seamless transitions between songs, offering a personalized touch to their recordings.

Another notable characteristic is its dual digital audio inputs, including optical and coaxial connections, enabling users to connect various digital devices for high-fidelity recording. This ensures that recordings capture the best possible sound quality, minimizing any loss during the transfer process.

In terms of playback, the Pioneer PDR-W839 boasts robust sound quality, with support for various playback formats. The device features advanced error correction technology, ensuring smooth playback even when the discs are less than perfect. Users can enjoy their recordings with clarity, experiencing music as it was meant to be heard.

Additionally, the PDR-W839 is equipped with a convenient LCD display that provides essential information during operation, such as track number and remaining time. The user-friendly remote control allows for easy navigation through menus and settings, offering flexibility in how users interact with their audio library.

Overall, the Pioneer PDR-W839 stands out for its combination of high-quality recording capabilities, multiple connectivity options, and user-friendly design. This makes it an invaluable asset for anyone looking to preserve and enjoy their audio collections in a modern format.
Top Page Image Contents